Qlogic Qmh2572 8gb Fc Hba Driver Download

Posted : admin On 29.12.2020
Printable version
  1. Qlogic Qmh2572 8gb Fc Hba Driver Download
  2. Qlogic 3

* RECOMMENDED * HP Firmware Flash for QLogic Fibre Channel Host Bus Adapters - Linux (x86_64)

By downloading, you agree to the terms and conditions of the Hewlett Packard Enterprise Software License Agreement.
Note: Some software requires a valid warranty, current Hewlett Packard Enterprise support contract, or a license fee.

Type:Firmware - Storage Fibre Channel and Fibre Channel Over Ethernet
Version:2015.02.02(21 Apr 2015)
Operating System(s):
Red Hat Enterprise Linux 7 Server
SUSE Linux Enterprise Server 11 (AMD64/EM64T)
SUSE Linux Enterprise Server 12
Red Hat Enterprise Linux 6 Server (x86-64)
File name:hp-firmware-fc-qlogic-2015.02.02-1.1.x86_64.rpm (2.3 MB)
This component upgrades the boot BIOS and firmware of QLogic Fibre Channel host bus adapters.

Updated the Firmware/BIOS/UEFI package for 8 Gb products.

  • 4 Gb HBA/Mezz
    • Package 2.03AF
    • Firmware 5.03.15
    • BIOS 3.13
  • 8 Gb HBA/Mezz
    • Package 3.72.03 (Binary 372A3)
    • Firmware 7.04.00
    • UEFI 6.36
    • BIOS 3.28
  • 16 Gb HBA/Mezz
    • Package 4.00.19
    • Firmware 7.04.00
    • UEFI 6.31
    • BIOS 3.28

Prerequisites:

The HP supplied QLogic driver and enablement kit must be installed prior to this firmware component being identified by HP SUM for deployment. The software is available from www.hp.com/go/fchba or use the appropriate driver included in the HP Support Pack for ProLiant 2015.04.0, which is available at www.hp.com/go/spp/download:

  • Linux FCoE/FC Driver Kit for HP Qlogic CNAs, HBAs and mezzanine HBAs, version 8.07.00.16.06.0, for Red Hat 6

  • Linux FCoE/FC Driver Kit for HP QLogic CNAs, HBAs and mezzanine HBAs and CNAs, version 8.07.00.16.07.0, for Red Hat 7

  • Linux FCoE/FC Driver Kit for HP Qlogic CNAs, HBAs and mezzanine HBAs, version 8.07.00.16.11.3, for Novell SUSE 11

  • Linux FCoE/FC Driver Kit for HP QLogic CNAs, HBAs and mezzanine HBAs and CNAs, version 8.07.00.16.12.0, for Novell SUSE 12

  • HP Fibre Channel Enablement Kit for Linux - QLogic, version 4.0.0.0-1

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

8a0206153ce51e0c5deb1a614fd057777a244905dc30dc7ce45af7dcde120ba3RPMS/x86_64/hp-firmware-fc-qlogic-2015.02.02-1.1.x86_64.rpm

Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.

Installation:

Firmware installation is a two-step process. Install the firmware installation tool rpm, then execute the installed tool to update the firmware.
1. Install the firmware installation tool: rpm -Uhv <rpm_package_name>.rpm This extracts the firmware installation tool to /usr/lib/x86_64-linux-gnu (64-bit systems) or /usr/lib/i386-linux-gnu (32-bit systems) in an hp-firmware-* folder.
2. cd to the appropriate location for your system, and update the firmware by executing ./.hpsetup
When the firmware installation completes, you may remove the firmware installation tool from your system using the rpm -e command.

End User License Agreements:
Hewlett-Packard End User License Agreement

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Important:
Release Notes:
HP StorageWorks QLogic Adapters Release Notes

Supported Devices and Features:
This firmware supports the following HP adapters:

  • HP FC1142SR 4Gb PCIe Host Bus Adapter
  • HP FC1242SR 4Gb PCIe DC Host Bus Adapter
  • HP 81Q PCIe Fibre Channel Host Bus Adapter
  • HP 82Q 8Gb Dual Port PCIe Fibre Channel Host Bus Adapter
  • QLogic QMH2562 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
  • QLogic QMH2462 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
  • HP QMH2572 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
  • HP StoreFabric SN1000Q 16Gb Fibre Channel Host Bus Adapter
  • HP QMH2672 16Gb FC HBA for c-Class BladeSystem

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

  • Corrects an unexpected behavior when 8Gb FC HBAs load the UEFI driver.
Release Notes:
HP StorageWorks QLogic Adapters Release Notes
Version:2019.03.03 (25 Jul 2019)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Fixed the following

Transceiver with part number 5700-0077 requires a minimum of 10ms after a write operation before reading it back. But the current Firmware is not waiting long enough, manifests as an intermittently incomplete to connect to Fabric

For more details please go through the document titled 'HPE StoreFabric Host Bus Adapters - During A Server Power-On Sequence, A SN1100Q Or SN1600Q Fibre Channel Adapter With A Specific 16GB Transceiver Will Intermittently Fail To Connect To All FC Switches At Both The UEFI And OS Levels' at the following link:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00078768en_us

Updated the Firmware/BIOS/UEFI packages for 8 Gb, 16 Gb and 32 Gb products.

  • Gen4 Fibre Channel Host Bus Adapter:
    • Package 3.79.02
    • Firmware 8.08.01
    • UEFI 6.66
    • BIOS 3.56
  • Gen5 Fibre Channel Host Bus Adapter:
    • Package 6.01.79
    • Firmware 8.08.203
    • UEFI 6.65
    • BIOS 3.43
  • Gen6 Fibre Channel Host Bus Adapter:
    • Package 1.72.02
    • Firmware 8.08.220
    • UEFI 6.51
    • BIOS 3.64

Version:2019.03.02 (4 Jun 2019)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Fixed the following

8Gb Standup & 8Gb Mezzanine

Firmware:

  • Fix regression where the firmware returned Time Out error code under heavy load.

UEFI

  • Driver progress messages are no longer displayed on SuperDome servers.
  • Corrected Driver Health string format on Gen10 servers

16Gb Standup & 16Gb Mezzanine

Firmware:

  • Fix unexpected behavior related to Diagnostic Port and Link Diagnostics operations (loopback, echo etc)

UEFI:

  • Driver progress messages are no longer displayed on SuperDome servers.
  • Corrected Driver Health string format on Gen10 servers.


16Gb/32Gb Standup

Firmware:

  • Fix unexpected behavior related to Diagnostic Port and Link Diagnostics operations (loopback, echo etc)

UEFI:

  • Corrected Driver Health string format on Gen10 servers.
  • Driver progress messages are no longer displayed on SuperDome servers.
  • Fixed QUIC (QUIC Protocol)

Added support for RedHat Enterprise Linux 8

Added support for the following:

16Gb/32Gb Standup

Windows server 2003 service pack 2 crack download. Firmware:

  • Add support for FC NVMe (Non-volatile memory express) ready
  • Support Link cable Beacon (LCB)

BIOS:

  • Added support for 5830C Secure flash

UEFI:

  • Added support for 5830C Secure flash

Updated the Firmware/BIOS/UEFI packages for 8 Gb, 16 Gb and 32 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.79.02
    • Firmware 8.08.01
    • UEFI 6.66
    • BIOS 3.56
  • 16 Gb HBA/Mezz
    • Package 6.01.79
    • Firmware 8.08.203
    • UEFI 6.65
    • BIOS 3.43
  • 16/32 Gb
    • Package 1.71.03
    • Firmware 8.08.204
    • UEFI 6.51
    • BIOS 3.64

Version:2019.03.01 (2 Apr 2019)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Fixed the following

8Gb Standup & 8Gb Mezzanine

Firmware:

  • Fix regression where the firmware returned Time Out error code under heavy load.

UEFI

  • Driver progress messages are no longer displayed on SuperDome servers.
  • Corrected Driver Health string format on Gen10 servers

16Gb Standup & 16Gb Mezzanine

Firmware:

  • Fix unexpected behavior related to Diagnostic Port and Link Diagnostics operations (loopback, echo etc)

UEFI:

  • Driver progress messages are no longer displayed on SuperDome servers.
  • Corrected Driver Health string format on Gen10 servers.


16Gb/32Gb Standup

Firmware:

  • Fix unexpected behavior related to Diagnostic Port and Link Diagnostics operations (loopback, echo etc)

UEFI:

  • Corrected Driver Health string format on Gen10 servers.
  • Driver progress messages are no longer displayed on SuperDome servers.
  • Fixed QUIC (QUIC Protocol)

Added support for the following:

16Gb/32Gb Standup

Firmware:

  • Add support for FC NVMe (Non-volatile memory express) ready
  • Support Link cable Beacon (LCB)

BIOS:

  • Added support for 5830C Secure flash

UEFI:

  • Added support for 5830C Secure flash

Updated the Firmware/BIOS/UEFI packages for 8 Gb, 16 Gb and 32 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.79.02
    • Firmware 8.08.01
    • UEFI 6.66
    • BIOS 3.56
  • 16 Gb HBA/Mezz
    • Package 6.01.79
    • Firmware 8.08.203
    • UEFI 6.65
    • BIOS 3.43
  • 16/32 Gb
    • Package 1.71.03
    • Firmware 8.08.204
    • UEFI 6.51
    • BIOS 3.64

Version:2018.09.01 (27 Sep 2018)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Fixed the following

8Gb Standup & 8Gb Mezzanine

UEFI

  • Firmware Management Protocol now supports flashing older Multiboot versions.
  • Firmware Management Protocol SetImage no longer displays dots on the screen.
  • The following HII (Human Interface Infrastructure) fields now require a reboot after value change:
    Legacy BIOS (Basic Input Output System) Selectable Boot

16Gb Standup & 16Gb Mezzanine

Firmware

  • Bring up up-link in 32G or 16G optical environment (FEC (Forward Error Correction) only) when connected with remote device that is not setting the SN bit to zero and TC bit to 1 at the same time during the speed negotiation phase and delays transmitting NOS during LQT phase.
  • Dropped FCP_CMD frame by a virtual port (VP index greater than 0) logged into the fabric via Fabric Login (FLOGI) while the primary adapter port (VP0) was disabled via Global VP (Virtual Port) Options bit 2 of Initialize Multi-ID Firmware MBC (0048h).

UEFI

  • Firmware Management Protocol now supports flashing older Multiboot versions.
  • Firmware Management Protocol SetImage no longer displays dots on the screen.
  • The following HII (Human Interface Infrastructure) fields now require a reboot after value change:
    Fabric Assigned WWPN (World Wide Port Name), Fabric Assigned Boot Logical Unit (LUN), Legacy BIOS (Basic Input Output System) Selectable Boot.

16Gb/32Gb Standup

Firmware

  • Bring up up-link in 32G or 16G optical environment (FEC (Forward Error Correction) only) when connected with remote device that is not setting the SN bit to zero and TC bit to 1 at the same time during the speed negotiation phase and delays transmitting NOS during LQT phase.

UEFI

  • Firmware Management Protocol now supports flashing older Multiboot versions.
  • Firmware Management Protocol SetImage no longer displays dots on the screen.
  • The following HII (Human Interface Infrastructure) fields now require a reboot after value change:
    FC (Fibre Channel) Tape, Fabric Assigned WWPN (World Wide Port Name), Fabric Assigned Boot LUN (Logical Unit), Legacy BIOS (Basic Input Output System) Selectable Boot.
  • Changed Legacy BIOS (Basic Input Output System) Selectable Boot HII (Human Interface Infrastructure) default to Enabled.

Added support for the following:

16Gb Standup & 16Gb Mezzanine

  • Power Loss calculation in D_port (Destination port) operation.

16Gb/32Gb Standup

  • Power Loss calculation in D_port (Destination port) operation.
  • Support maximum training timeout for 32Gbps data rate per FC-FS-4 (Fibre Channel Framing and Signaling) specification.

Updated the Firmware/BIOS/UEFI packages for 8 Gb, 16 Gb and 32 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.77.08
    • Firmware 8.07.00
    • UEFI 6.64
    • BIOS 3.56
  • 16 Gb HBA/Mezz
    • Package 6.01.59
    • Firmware 8.07.16
    • UEFI 6.63
    • BIOS 3.43
  • 16/32 Gb
    • Package 01.70.85
    • Firmware 8.07.18
    • UEFI 6.47
    • BIOS 3.54

Version:2018.06.01 (26 Jun 2018)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Fixed the following

8Gb Standup & 8Gb Mezzanine

UEFI

  • Firmware Management Protocol now supports flashing older Multiboot versions.
  • Firmware Management Protocol SetImage no longer displays dots on the screen.
  • The following HII (Human Interface Infrastructure) fields now require a reboot after value change:
    Legacy BIOS (Basic Input Output System) Selectable Boot

16Gb Standup & 16Gb Mezzanine

Firmware

  • Bring up up-link in 32G or 16G optical environment (FEC (Forward Error Correction) only) when connected with remote device that is not setting the SN bit to zero and TC bit to 1 at the same time during the speed negotiation phase and delays transmitting NOS during LQT phase.
  • Dropped FCP_CMD frame by a virtual port (VP index greater than 0) logged into the fabric via Fabric Login (FLOGI) while the primary adapter port (VP0) was disabled via Global VP (Virtual Port) Options bit 2 of Initialize Multi-ID Firmware MBC (0048h).

UEFI

  • Firmware Management Protocol now supports flashing older Multiboot versions.
  • Firmware Management Protocol SetImage no longer displays dots on the screen.
  • The following HII (Human Interface Infrastructure) fields now require a reboot after value change:
    Fabric Assigned WWPN (World Wide Port Name), Fabric Assigned Boot Logical Unit (LUN), Legacy BIOS (Basic Input Output System) Selectable Boot.

16Gb/32Gb Standup

Firmware

  • Bring up up-link in 32G or 16G optical environment (FEC (Forward Error Correction) only) when connected with remote device that is not setting the SN bit to zero and TC bit to 1 at the same time during the speed negotiation phase and delays transmitting NOS during LQT phase.

UEFI

  • Firmware Management Protocol now supports flashing older Multiboot versions.
  • Firmware Management Protocol SetImage no longer displays dots on the screen.
  • The following HII (Human Interface Infrastructure) fields now require a reboot after value change:
    FC (Fibre Channel) Tape, Fabric Assigned WWPN (World Wide Port Name), Fabric Assigned Boot LUN (Logical Unit), Legacy BIOS (Basic Input Output System) Selectable Boot.
  • Changed Legacy BIOS (Basic Input Output System) Selectable Boot HII (Human Interface Infrastructure) default to Enabled.

Added support for the following:

16Gb Standup & 16Gb Mezzanine

  • Power Loss calculation in D_port (Destination port) operation.

16Gb/32Gb Standup

  • Power Loss calculation in D_port (Destination port) operation.
  • Support maximum training timeout for 32Gbps data rate per FC-FS-4 (Fibre Channel Framing and Signaling) specification.

Updated the Firmware/BIOS/UEFI packages for 8 Gb, 16 Gb and 32 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.77.08
    • Firmware 8.07.00
    • UEFI 6.64
    • BIOS 3.56
  • 16 Gb HBA/Mezz
    • Package 6.01.59
    • Firmware 8.07.16
    • UEFI 6.63
    • BIOS 3.43
  • 16/32 Gb
    • Package 01.70.85
    • Firmware 8.07.18
    • UEFI 6.47
    • BIOS 3.54

Version:2018.02.01 (5 Feb 2018)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Fixed the following:

8Gb Standup & 8Gb Mezzanine

BIOS

  • CTRL-Q cosmetic unexpected behavior

UEFI

  • Simple Control Transmission (SCT) 2.5 Extended Small Computer System Interface (SCSI) Pass Thru Protocol test incompleteness. PassThru_Func test no longer goes incomplete.
  • Operating System (OS) boot incomplete behavior when Read Only Memory (ROM) Based Setup-Utility (RBSU) Power On Self -Test (POST) Discovery Mode was set to Force Fast Discovery
  • Human Interface Infrastructure (HII) save unexpected behavior on Superdome servers. In the World Wide Name (WWN) Database menu, changes to Drive0 and Drive1 are now saved to Non Volatile Random Access Memory (NVRAM)
  • Unexpected behavior which caused adapter to not appear on the Health Summary page.
  • Operating System (OS) boot incomplete behavior when Read Only Memory (ROM) Based Setup-Utility (RBSU) Power On Self -Test (POST) Discovery Mode was set to Auto
  • World Login unexpected behavior when Power On Self -Test (POST) Discovery Mode was set to Auto

16Gb Standup & 16Gb Mezzanine

UEFI

  • Simple Control Transmission (SCT) 2.5 Extended Small Computer System Interface (SCSI) Pass Thru Protocol test incompleteness. PassThru_Func test no longer goes incomplete

16Gb/32Gb Standup

UEFI

  • Human Interface Infrastructure (HII) save unexpected behavior. In the World Wide Name (WWN) Database menu, changes to Drive0 and Drive1 are now saved to Non Volatile Random Access Memory (NVRAM).
  • Corrected adapter name format in Read Only Memory (ROM) Based Setup-Utility (RBSU) menus.
  • Unexpected behavior that caused Non Volatile Random Access Memory (NVRAM) overwritten after Human Interface Infrastructure (HII) changes
  • Behavior that caused Human Interface Infrastructure (HII) fields to not revert back to original settings when ESC key was used to discard changes

Added support for the following:

8Gb Standup & 8Gb Mezzanine

  • Additional 'show Command Line Processor (CLP's)'.
  • Gen10 Driver Health error codes.

16Gb Standup & 16Gb Mezzanine

  • Gen10 Driver Health error codes
  • OEMHP_TargetBootPaths Command Line Processor (CLP) command.

16Gb/32Gb Standup

  • Gen10 Driver Health error codes.
  • OEMHP_TargetBootPaths Command Line Processor (CLP) command.
  • Semaphore checks before flash reads and writes

Updated the Firmware/BIOS/UEFI packages for 8 Gb, 16 Gb and 32 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.77.03
    • Firmware 8.05.00
    • UEFI 6.59
    • BIOS 3.56
  • 16 Gb HBA/Mezz
    • Package 6.01.50
    • Firmware 8.05.64
    • UEFI 6.58
    • BIOS 3.43
  • 16/32 Gb
    • Package 01.70.66
    • Firmware 8.05.65
    • UEFI 6.41
    • BIOS 3.54

Version:2017.09.01 (25 Sep 2017)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

8Gb Standup & 8Gb Mezzanine

BIOS

  • Incorrect processing of Command Line Processor (CLP) ‘set netport’
  • Improper display of Command Line Processor (CLP) Logical Unit Number (LUN)

UEFI

  • Changed Operation Mode Human Interface Infrastructure (HII) strings. The new strings match the FastUTIL strings.
  • Self-certification Test (SCT) 2.4B BlockIO2 Protocol bug.
  • No response during Self-certification Test (SCT) 2.4B BlockIO2 Protocol test.
  • Self-certification Test (SCT) 2.4B AdapterInfo Protocol bugs.

16Gb Standup & 16Gb Mezzanine

UEFI

  • Adapter not appearing in Health Summary page.
  • Invalid Health message when link was down or driver was disabled.
  • Adapter connection mode to change (OS install related) when the Human Interface Infrastructure (HII) Link Speed field changed.

32Gb Standup & 16Gb Mezzanine

UEFI

  • Adapter not appearing in Health Summary page.
  • Invalid Health message when link was down or driver was disabled.
  • Added code to start operational firmware early.

Updated the Firmware/BIOS/UEFI packages for 8 Gb, 16 Gb and 32 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.76.06
    • Firmware 8.05.00
    • UEFI 6.52
    • BIOS 3.56
  • 16 Gb HBA/Mezz
    • Package 6.01.41
    • Firmware 8.05.63
    • UEFI 6.54
    • BIOS 3.43
  • 16/32 Gb
    • Package 01.70.51
    • Firmware 8.05.61
    • UEFI 6.36
    • BIOS 3.54

Version:2017.06.01 (12 Jul 2017)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

8Gb Standup & 8Gb Mezzanine

BIOS

  • Maintenance updates

UEFI

  • Fixed unexpected behavior during Win2012 boot on 3PAR storage array

16Gb Standup & 16Gb Mezzanine

BIOS

  • Added code to allow direct connected LUN to be configured when FA_BLUN is enabled.

  • Fixed unexpected behavior in check_mem64 routine where pci address was not setup correctly.

  • Fixed bug that caused FlexAddress to stop

UEFI

  • Fixed HII Load Defaults issue onHP QMH2672 16Gb Fibre Channel Host Bus Adapter . HII Load defaults no longer adds items to the Adapter Settings menu

  • Fixed unexpected behavior during Win2012 boot on 3PAR storage array

16Gb Standup & 16Gb Mezzanine

BIOS

  • Added POST Discovery Mode functionality

UEFI

  • Added POST Discovery Mode functionality

  • Added Scan Fibre Devices HII field

32Gb Standup & 16Gb Mezzanine

BIOS

  • Added POST Discovery Mode functionality

UEFI

  • Added POST Discovery Mode functionality

Updated the Firmware/BIOS/UEFI packages for 8 Gb, 16 Gb and 32 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.76.05
    • Firmware 8.05.00
    • UEFI 6.52
    • BIOS 3.31
  • 16 Gb HBA/Mezz
    • Package 6.01.36
    • Firmware 8.05.60
    • UEFI 6.53
    • BIOS 3.43
  • 16/32 Gb
    • Package 01.70.47
    • Firmware 8.05.60
    • UEFI 6.34
    • BIOS 3.54

Version:2016.12.01 (12 Dec 2016)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Added support for the following devices:

  • HPE StoreFabric SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter
  • HPE StoreFabric SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

Updated the Firmware/BIOS/UEFI packages for 8 Gb, 16 Gb and 32 Gb products.

  • 8 Gb HBA
    • Package 3.75.07
    • Firmware 8.02.00
    • UEFI 6.45
    • BIOS 3.31
  • 16 Gb HBA
    • Package 6.01.14
    • Firmware 8.02.51
    • UEFI 6.39
    • BIOS 3.31
  • 16/32 Gb SN1100Q/SN1600Q
    • Package 01.70.27
    • Firmware 8.03.10
    • UEFI 6.24
    • BIOS 3.37

Version:2016.09.01 (26 Sep 2016)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Add support for SN1600Q.

Updated the Firmware/BIOS/UEFI packages for 32 Gb products.

  • 32 Gb HBA SN1600Q
    • Package 01.70.24
    • Firmware 8.03.10
    • UEFI 6.22
    • BIOS 3.37

Version:2016.10.01 (24 Oct 2016)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Add support for the following devices:

  • HPE StoreFabric 84Q 4P 8Gb Fibre Channel HBA
  • HPE StoreFabric SN1100Q 16Gb 2P FC HBA
  • HPE StoreFabric SN1100Q 16Gb 1P FC HBA
  • HPE Synergy 3830C 16G Fibre Channel Host Bus Adapter

Updated the Firmware/BIOS/UEFI packages for 8 Gb and 16 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.75.07
    • Firmware 8.02.00
    • UEFI 6.45
    • BIOS 3.31
  • 16 Gb HBA/Mezz
    • Package 6.01.14
    • Firmware 8.02.51
    • UEFI 6.39
    • BIOS 3.31
  • 16 Gb SN1100Q
    • Package 01.70.17
    • Firmware 8.03.05
    • UEFI 6.19
    • BIOS 3.37

Version:2016.04.01 (31 Mar 2016)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Add support for the following devices:

  • HPE StoreFabric 84Q 4P 8Gb Fibre Channel HBA
  • HPE StoreFabric SN1100Q 16Gb 2P FC HBA
  • HPE StoreFabric SN1100Q 16Gb 1P FC HBA
  • HPE Synergy 3830C 16G Fibre Channel Host Bus Adapter

Updated the Firmware/BIOS/UEFI packages for 8 Gb and 16 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.75.05
    • Firmware 8.02.00
    • UEFI 6.43
    • BIOS 3.31
  • 16 Gb HBA/Mezz
    • Package 6.01.05
    • Firmware 8.02.00
    • UEFI 6.38
    • BIOS 3.31
  • 16 Gb SN1100Q
    • Package 01.70.15
    • Firmware 8.03.05
    • UEFI 6.19
    • BIOS 3.37

Version:2016.02.01 (1 Apr 2016)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

16 Gb firmware

Fixed reporting asynchronous events related to link transitions via the ATIO queue with the 'Enable Asynchronous Event to Immediate Notify IOCB' option.

Fixed firmware system error (8002h) that occurred during target mode cleanup.

Fixed firmware system error that occurred during target mode cleanup with the presence of outstanding REC exchanges associated with SCSI exchanges.

Fixed login collision that occurred in private loop topology.

Updated the Firmware/BIOS/UEFI packages for 8 Gb and 16 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.75.03 (Binary 375A3)
    • Firmware 8.02.00
    • UEFI 6.42
    • BIOS 3.31
  • 16 Gb HBA/Mezz
    • Package 6.01.00
    • Firmware 8.02.00
    • UEFI 6.37
    • BIOS 3.31

Version:2015.10.01 (1 Oct 2015)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

8Gb Standup & 8Gb Mezzanine

BIOS

  • Maintenance updates

UEFI

  • Fixed OCBB bug that caused DMA errors during Linux boot
  • HII WWN Database menu allows the user to pick from a list of targets and LUNs
  • Fixed Windows Server 2012 boot issue on target storage array
  • Fixed OCSD checksum error on certain HP blade servers. Added PCI bus and device information to the firmware OCSD structure

16Gb Standup & 16Gb Mezzanine

BIOS

  • Maintenance updates

UEFI

  • Fixed OCBB bug that caused DMA errors during Linux boot
  • HII WWN Database menu allows the user to pick from a list of targets and LUNs
  • Fixed Windows Server 2012 boot issue on target storage array
  • Fixed OCSD checksum error on certain HP blade servers. Added PCI bus and device information to the firmware OCSD structure
  • Fixed OCBB polling error on servers
  • Fixed memory leak issue when driver exits due to NVRAM error
  • Fixed driver mapping issues on CLP enabled servers

Updated the Firmware/BIOS/UEFI packages for 8 Gb and 16 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.73.05 (Binary 373A5)
    • Firmware 8.01.02
    • UEFI 6.42
    • BIOS 3.31
  • 16 Gb HBA/Mezz
    • Package 6.00.14
    • Firmware 8.01.42
    • UEFI 6.37
    • BIOS 3.31

Version:2015.06.01 (15 Jun 2015)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

  • For 8 Gb UEFI
    • Fixed a driver load error when the Adapter Disable NVRAM bit was set.

Updated the Firmware/BIOS/UEFI packages for 8 Gb and 16 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.72.03 (Binary 372A3)
    • Firmware 7.04.00
    • UEFI 6.36
    • BIOS 3.28
  • 16 Gb HBA/Mezz
    • Package 5.00.12
    • Firmware 8.00.40
    • UEFI 6.31
    • BIOS 3.28

Version:2015.02.02 (21 Apr 2015)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

  • Corrects an unexpected behavior when 8Gb FC HBAs load the UEFI driver.

Updated the Firmware/BIOS/UEFI package for 8 Gb products.

  • 4 Gb HBA/Mezz
    • Package 2.03AF
    • Firmware 5.03.15
    • BIOS 3.13
  • 8 Gb HBA/Mezz
    • Package 3.72.03 (Binary 372A3)
    • Firmware 7.04.00
    • UEFI 6.36
    • BIOS 3.28
  • 16 Gb HBA/Mezz
    • Package 4.00.19
    • Firmware 7.04.00
    • UEFI 6.31
    • BIOS 3.28

Version:2015.02.01 (30 Mar 2015)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

8 Gb Products
BIOS

  • Changed VLAN ID max value from 4095 to 4094
  • Changed CTRL-Q to allow max value for Login Retry
UEFI
  • Fixed a bug that caused the HBA BIOS to ignore VC assigned WWPNs
  • Fixed drive mapping issues on CLP enabled servers


16 Gb Products
BIOS

  • Fixed LUN enabled but fabric assigned BOOT LUN not found
  • Changed CTRL-Q to allow max value for Login Retry
UEFI
  • Fixed memory leak issue when driver exits due to NVRAM error

Updated the Firmware/BIOS/UEFI packages for 8 Gb and 16 Gb products.

  • 4 Gb HBA/Mezz
    • Package 2.03AF
    • Firmware 5.03.15
    • BIOS 3.13
  • 8 Gb HBA/Mezz
    • Package 3.71.09 (Binary 371A9)
    • Firmware 7.04.00
    • UEFI 6.35
    • BIOS 3.28
      • BIOS Enhancements:
      • Added support for fabric assigned BOOT LUN
      • Added support for show port clp
      • Added code to not configure any targets when fabric assign Boot
      • Added code to allow fabric assigned Boot LUN when fabric assign WWPN enabled
      • Added options in CTRL-Q utility to enable fabric assign WWPN and fabric assign BOOT LUN
  • 16 Gb HBA/Mezz
    • Package 4.00.19
    • Firmware 7.04.00
    • UEFI 6.31
    • BIOS 3.28
      • BIOS Enhancements:
      • Added support for fabric assigned BOOT LUN
      • Added support for show port clp
      • Added code to not configure any targets when fabric assign Boot
      • Added code to allow fabric assigned Boot LUN when fabric assign WWPN enabled
      • Added options in CTRL-Q utility to enable fabric assign WWPN and fabric assign BOOT LUN

Version:2014.09.01 (9 Sep 2014)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

8 Gb Products
BIOS

  • Fixed bug in displaying selectable boot lun
  • Fixed issue with not restoring defaults on port 1
  • Fixed bug that could cause buffer overrun in CTRL-Q with Report Lun command
  • Added additional time to login target when called after EFI driver unloads.
  • Added code to handle boot LUN Greater than 255.
  • Added code to display message when 64 bit address is detected.
uEFI
  • Fixed a bug that caused the HBA BIOS to ignore VC assigned WWPNs.
  • Fixed drive mapping issues on CLP enabled servers.


16 Gb Products
BIOS

  • Added additional time to login target when called after EFI driver unloads.
  • Added code to handle boot LUN Greater than 255.
  • Added code to display message when 64 bit address is detected.
uEFI
  • Fixed a bug that caused the HBA BIOS to ignore VC assigned WWPNs.
  • Fixed drive mapping issues on CLP enabled servers.

Updated the firmware/BIOS/EFI packages for 8 Gb and 16 Gb products.

  • 4 Gb HBA/Mezz
    • Package 2.03AF
    • Firmware 5.03.15
    • BIOS 3.13
  • 8 Gb HBA/Mezz
    • Package 3.71.01 (Binary 371A1)
    • Firmware 7.03.00
    • BIOS 3.24
    • UEFI 6.32
  • 16 Gb HBA/Mezz
    • Package 4.00.12
    • Firmware 7.03.01
    • BIOS 3.24
    • UEFI 6.29

Version:2014.04.01 (21 Apr 2014)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

  • Updated the firmware/BIOS packages for 8 Gb and 16 Gb products.

  • 4 Gb HBA/Mezz
    • Package 2.03AF
    • Firmware 5.03.15
    • BIOS 3.13
  • QMH2572 Mezz Card
    • Package 2.59AF
    • Firmware 5.06.04
    • BIOS 3.13
  • 8 Gb HBA/Mezz
    • Enabled legacy BIOS boot
    • Enabled secure boot

    • Package 3.60A4
    • Firmware 5.09.00
    • BIOS 3.13
    • UEFI 6.28
  • 16 Gb HBA/Mezz
    • Enabled legacy BIOS boot
    • Enabled secure boot

    • Package 3.90.02
    • Firmware 6.07.02
    • BIOS 3.21
    • UEFI 6.25

Version:2014.02.01 (18 Feb 2014)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

  • Added UEFI driver for 8 Gb and 16 Gb products (except QMH2572).
    This component contains:
  • 4 Gb HBA/Mezz
    • Package 2.03AF
    • Firmware 5.03.15
    • BIOS 3.13
  • 8 Gb HBA/Mezz
    • Package 3.60A2
    • Firmware 5.09.00
    • BIOS 3.13
    • UEFI 6.23
  • 16 Gb HBA/Mezz
    • Package 3.90.01
    • Firmware 6.07.02
    • BIOS 3.21
    • UEFI 6.20
  • QMH2572 8 Gb FC Mezz
    • Package 2.59AF
    • Firmware 5.06.04
    • BIOS 3.13

Version:2013.08.01 (10 Sep 2013)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

SN1000Q BIOS fixes:

  • Fixed issue in CTRL_Q utility that might cause some cosmetic display issues.
  • Fixed issue with CTRL-Q Loopback Utility.

SN1000Q FW fixes:

  • Intermittent link failures that occurred after a cable pull.
  • Firmware failed to detect port id change after Fabric login timeout.
  • Performance scaling issues on multiple 4G tape devices.
  • Resolved a low write performance (throughput) issue seen when running single
    threaded IOs to multiple slower targets.
  • If the disable VP command was received while an ELS PassThru exchange was active
    for VP being disabled this caused a firmware buffer pool corruption and the
    firmware stopped responding.
  • A possible command iocb timeout occurred if the driver provided an invalid response
    queue reference.
  • Added new firmware/BIOS packages for 8 Gb and 16 Gb products:

  • 8 Gb HBA/Mezz
    • Package 2.65A1
    • Firmware 5.09.00
    • BIOS 3.13
    • UEFI 6.15
  • SN1000Q/QMH2672
    • Package 2.02.47
    • Firmware 6.07.02
    • BIOS 3.21
      • Now checks for invalid LUN in CTRL-Q scan devices.
      • Check for 4G flag in NVRAM for FC.
    • UEFI 6.13
  • QMH2572 8 Gb FC Mezz
    • Package 2.59AF
    • Firmware 5.06.04
    • BIOS 3.13
  • 4 Gb HBA/Mezz
    • Package 2.03AF
    • Firmware 5.03.15
    • BIOS 3.13

Version:2013.02.01 (19 Feb 2013)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

SN1000Q BIOS changes from 3.14 to 3.18:

  • Added code to check/program Feature Config checksum.
  • Fix bug that could cause buffer overrun in CTRL-Q with Report Lun command
  • Changed code to use 32 bit pointer to allocate/deallocate EBDA memory.
  • Added code to check/program Feature Config checksum.
  • Fixed Lun select & display issues with CTRL-Q
  • Added new firmware/BIOS packages

  • SN1000Q, 2.01.10
    • Firmware 6.02.00
    • BIOS 3.18

Version:2012.10.01 (26 Oct 2012)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

  • Added new firmware/BIOS packages

  • 4 Gb HBA/Mezz cards, 2.03AF
    • Firmware 5.03.15
    • BIOS 3.13
  • 8 Gb HBA/Mezz cards, 2.58AF
    • Firmware 5.03.15
    • BIOS 3.13
  • QMH2572 8 Gb FC Mezz, 2.59AF
    • Firmware 5.06.04
    • BIOS 3.13

Type:Firmware - Storage Fibre Channel and Fibre Channel Over Ethernet
Version:2015.02.02(21 Apr 2015)
Operating System(s):
Red Hat Enterprise Linux 6 Server (x86-64)
Red Hat Enterprise Linux 7 Server
SUSE Linux Enterprise Server 11 (AMD64/EM64T)
SUSE Linux Enterprise Server 12

Description

This component upgrades the boot BIOS and firmware of QLogic Fibre Channel host bus adapters.

Enhancements

Updated the Firmware/BIOS/UEFI package for 8 Gb products.

  • 4 Gb HBA/Mezz
    • Package 2.03AF
    • Firmware 5.03.15
    • BIOS 3.13
  • 8 Gb HBA/Mezz
    • Package 3.72.03 (Binary 372A3)
    • Firmware 7.04.00
    • UEFI 6.36
    • BIOS 3.28
  • 16 Gb HBA/Mezz
    • Package 4.00.19
    • Firmware 7.04.00
    • UEFI 6.31
    • BIOS 3.28

Installation Instructions

Prerequisites:

The HP supplied QLogic driver and enablement kit must be installed prior to this firmware component being identified by HP SUM for deployment. The software is available from www.hp.com/go/fchba or use the appropriate driver included in the HP Support Pack for ProLiant 2015.04.0, which is available at www.hp.com/go/spp/download:

  • Linux FCoE/FC Driver Kit for HP Qlogic CNAs, HBAs and mezzanine HBAs, version 8.07.00.16.06.0, for Red Hat 6

  • Linux FCoE/FC Driver Kit for HP QLogic CNAs, HBAs and mezzanine HBAs and CNAs, version 8.07.00.16.07.0, for Red Hat 7

  • Linux FCoE/FC Driver Kit for HP Qlogic CNAs, HBAs and mezzanine HBAs, version 8.07.00.16.11.3, for Novell SUSE 11

  • Linux FCoE/FC Driver Kit for HP QLogic CNAs, HBAs and mezzanine HBAs and CNAs, version 8.07.00.16.12.0, for Novell SUSE 12

  • HP Fibre Channel Enablement Kit for Linux - QLogic, version 4.0.0.0-1

To ensure the integrity of your download, HPE recommends verifying your results with this SHA-256 Checksum value:

8a0206153ce51e0c5deb1a614fd057777a244905dc30dc7ce45af7dcde120ba3RPMS/x86_64/hp-firmware-fc-qlogic-2015.02.02-1.1.x86_64.rpm

Reboot Requirement:
Reboot is required after installation for updates to take effect and hardware stability to be maintained.

Installation:

Firmware installation is a two-step process. Install the firmware installation tool rpm, then execute the installed tool to update the firmware.
1. Install the firmware installation tool: rpm -Uhv <rpm_package_name>.rpm This extracts the firmware installation tool to /usr/lib/x86_64-linux-gnu (64-bit systems) or /usr/lib/i386-linux-gnu (32-bit systems) in an hp-firmware-* folder.
2. cd to the appropriate location for your system, and update the firmware by executing ./.hpsetup
When the firmware installation completes, you may remove the firmware installation tool from your system using the rpm -e command.

Release Notes

End User License Agreements:
Hewlett-Packard End User License Agreement

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Important:
Release Notes:
HP StorageWorks QLogic Adapters Release Notes

Supported Devices and Features:
This firmware supports the following HP adapters:

  • HP FC1142SR 4Gb PCIe Host Bus Adapter
  • HP FC1242SR 4Gb PCIe DC Host Bus Adapter
  • HP 81Q PCIe Fibre Channel Host Bus Adapter
  • HP 82Q 8Gb Dual Port PCIe Fibre Channel Host Bus Adapter
  • QLogic QMH2562 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
  • QLogic QMH2462 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
  • HP QMH2572 8Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
  • HP StoreFabric SN1000Q 16Gb Fibre Channel Host Bus Adapter
  • HP QMH2672 16Gb FC HBA for c-Class BladeSystem

Fixes

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

  • Corrects an unexpected behavior when 8Gb FC HBAs load the UEFI driver.

Important

Release Notes:
HP StorageWorks QLogic Adapters Release Notes

Revision History

Version:2019.03.03 (25 Jul 2019)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Fixed the following

Transceiver with part number 5700-0077 requires a minimum of 10ms after a write operation before reading it back. But the current Firmware is not waiting long enough, manifests as an intermittently incomplete to connect to Fabric

For more details please go through the document titled 'HPE StoreFabric Host Bus Adapters - During A Server Power-On Sequence, A SN1100Q Or SN1600Q Fibre Channel Adapter With A Specific 16GB Transceiver Will Intermittently Fail To Connect To All FC Switches At Both The UEFI And OS Levels' at the following link:
https://support.hpe.com/hpsc/doc/public/display?docId=emr_na-a00078768en_us

Updated the Firmware/BIOS/UEFI packages for 8 Gb, 16 Gb and 32 Gb products.

  • Gen4 Fibre Channel Host Bus Adapter:
    • Package 3.79.02
    • Firmware 8.08.01
    • UEFI 6.66
    • BIOS 3.56
  • Gen5 Fibre Channel Host Bus Adapter:
    • Package 6.01.79
    • Firmware 8.08.203
    • UEFI 6.65
    • BIOS 3.43
  • Gen6 Fibre Channel Host Bus Adapter:
    • Package 1.72.02
    • Firmware 8.08.220
    • UEFI 6.51
    • BIOS 3.64

Version:2019.03.02 (4 Jun 2019)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Fixed the following

8Gb Standup & 8Gb Mezzanine

Firmware:

  • Fix regression where the firmware returned Time Out error code under heavy load.

UEFI

  • Driver progress messages are no longer displayed on SuperDome servers.
  • Corrected Driver Health string format on Gen10 servers

16Gb Standup & 16Gb Mezzanine

Firmware:

  • Fix unexpected behavior related to Diagnostic Port and Link Diagnostics operations (loopback, echo etc)

UEFI:

  • Driver progress messages are no longer displayed on SuperDome servers.
  • Corrected Driver Health string format on Gen10 servers.


16Gb/32Gb Standup

Firmware:

  • Fix unexpected behavior related to Diagnostic Port and Link Diagnostics operations (loopback, echo etc)

UEFI:

  • Corrected Driver Health string format on Gen10 servers.
  • Driver progress messages are no longer displayed on SuperDome servers.
  • Fixed QUIC (QUIC Protocol)

Added support for RedHat Enterprise Linux 8

Added support for the following:

16Gb/32Gb Standup

Firmware:

  • Add support for FC NVMe (Non-volatile memory express) ready
  • Support Link cable Beacon (LCB)

BIOS:

  • Added support for 5830C Secure flash

UEFI:

  • Added support for 5830C Secure flash

Updated the Firmware/BIOS/UEFI packages for 8 Gb, 16 Gb and 32 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.79.02
    • Firmware 8.08.01
    • UEFI 6.66
    • BIOS 3.56
  • 16 Gb HBA/Mezz
    • Package 6.01.79
    • Firmware 8.08.203
    • UEFI 6.65
    • BIOS 3.43
  • 16/32 Gb
    • Package 1.71.03
    • Firmware 8.08.204
    • UEFI 6.51
    • BIOS 3.64

Version:2019.03.01 (2 Apr 2019)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Fixed the following

8Gb Standup & 8Gb Mezzanine

Firmware:

  • Fix regression where the firmware returned Time Out error code under heavy load.

UEFI

  • Driver progress messages are no longer displayed on SuperDome servers.
  • Corrected Driver Health string format on Gen10 servers

16Gb Standup & 16Gb Mezzanine

Firmware:

  • Fix unexpected behavior related to Diagnostic Port and Link Diagnostics operations (loopback, echo etc)

UEFI:

  • Driver progress messages are no longer displayed on SuperDome servers.
  • Corrected Driver Health string format on Gen10 servers.


16Gb/32Gb Standup

Firmware:

  • Fix unexpected behavior related to Diagnostic Port and Link Diagnostics operations (loopback, echo etc)

UEFI:

  • Corrected Driver Health string format on Gen10 servers.
  • Driver progress messages are no longer displayed on SuperDome servers.
  • Fixed QUIC (QUIC Protocol)

Added support for the following:

16Gb/32Gb Standup

Firmware:

  • Add support for FC NVMe (Non-volatile memory express) ready
  • Support Link cable Beacon (LCB)

BIOS:

  • Added support for 5830C Secure flash

UEFI:

  • Added support for 5830C Secure flash

Updated the Firmware/BIOS/UEFI packages for 8 Gb, 16 Gb and 32 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.79.02
    • Firmware 8.08.01
    • UEFI 6.66
    • BIOS 3.56
  • 16 Gb HBA/Mezz
    • Package 6.01.79
    • Firmware 8.08.203
    • UEFI 6.65
    • BIOS 3.43
  • 16/32 Gb
    • Package 1.71.03
    • Firmware 8.08.204
    • UEFI 6.51
    • BIOS 3.64

Version:2018.09.01 (27 Sep 2018)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Fixed the following

8Gb Standup & 8Gb Mezzanine

UEFI

  • Firmware Management Protocol now supports flashing older Multiboot versions.
  • Firmware Management Protocol SetImage no longer displays dots on the screen.
  • The following HII (Human Interface Infrastructure) fields now require a reboot after value change:
    Legacy BIOS (Basic Input Output System) Selectable Boot

16Gb Standup & 16Gb Mezzanine

Firmware

  • Bring up up-link in 32G or 16G optical environment (FEC (Forward Error Correction) only) when connected with remote device that is not setting the SN bit to zero and TC bit to 1 at the same time during the speed negotiation phase and delays transmitting NOS during LQT phase.
  • Dropped FCP_CMD frame by a virtual port (VP index greater than 0) logged into the fabric via Fabric Login (FLOGI) while the primary adapter port (VP0) was disabled via Global VP (Virtual Port) Options bit 2 of Initialize Multi-ID Firmware MBC (0048h).

UEFI

  • Firmware Management Protocol now supports flashing older Multiboot versions.
  • Firmware Management Protocol SetImage no longer displays dots on the screen.
  • The following HII (Human Interface Infrastructure) fields now require a reboot after value change:
    Fabric Assigned WWPN (World Wide Port Name), Fabric Assigned Boot Logical Unit (LUN), Legacy BIOS (Basic Input Output System) Selectable Boot.

16Gb/32Gb Standup

Firmware

  • Bring up up-link in 32G or 16G optical environment (FEC (Forward Error Correction) only) when connected with remote device that is not setting the SN bit to zero and TC bit to 1 at the same time during the speed negotiation phase and delays transmitting NOS during LQT phase.

UEFI

  • Firmware Management Protocol now supports flashing older Multiboot versions.
  • Firmware Management Protocol SetImage no longer displays dots on the screen.
  • The following HII (Human Interface Infrastructure) fields now require a reboot after value change:
    FC (Fibre Channel) Tape, Fabric Assigned WWPN (World Wide Port Name), Fabric Assigned Boot LUN (Logical Unit), Legacy BIOS (Basic Input Output System) Selectable Boot.
  • Changed Legacy BIOS (Basic Input Output System) Selectable Boot HII (Human Interface Infrastructure) default to Enabled.

Added support for the following:

16Gb Standup & 16Gb Mezzanine

  • Power Loss calculation in D_port (Destination port) operation.

16Gb/32Gb Standup

  • Power Loss calculation in D_port (Destination port) operation.
  • Support maximum training timeout for 32Gbps data rate per FC-FS-4 (Fibre Channel Framing and Signaling) specification.

Updated the Firmware/BIOS/UEFI packages for 8 Gb, 16 Gb and 32 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.77.08
    • Firmware 8.07.00
    • UEFI 6.64
    • BIOS 3.56
  • 16 Gb HBA/Mezz
    • Package 6.01.59
    • Firmware 8.07.16
    • UEFI 6.63
    • BIOS 3.43
  • 16/32 Gb
    • Package 01.70.85
    • Firmware 8.07.18
    • UEFI 6.47
    • BIOS 3.54

Version:2018.06.01 (26 Jun 2018)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Fixed the following

8Gb Standup & 8Gb Mezzanine

UEFI

  • Firmware Management Protocol now supports flashing older Multiboot versions.
  • Firmware Management Protocol SetImage no longer displays dots on the screen.
  • The following HII (Human Interface Infrastructure) fields now require a reboot after value change:
    Legacy BIOS (Basic Input Output System) Selectable Boot

16Gb Standup & 16Gb Mezzanine

Firmware

  • Bring up up-link in 32G or 16G optical environment (FEC (Forward Error Correction) only) when connected with remote device that is not setting the SN bit to zero and TC bit to 1 at the same time during the speed negotiation phase and delays transmitting NOS during LQT phase.
  • Dropped FCP_CMD frame by a virtual port (VP index greater than 0) logged into the fabric via Fabric Login (FLOGI) while the primary adapter port (VP0) was disabled via Global VP (Virtual Port) Options bit 2 of Initialize Multi-ID Firmware MBC (0048h).

UEFI

  • Firmware Management Protocol now supports flashing older Multiboot versions.
  • Firmware Management Protocol SetImage no longer displays dots on the screen.
  • The following HII (Human Interface Infrastructure) fields now require a reboot after value change:
    Fabric Assigned WWPN (World Wide Port Name), Fabric Assigned Boot Logical Unit (LUN), Legacy BIOS (Basic Input Output System) Selectable Boot.

16Gb/32Gb Standup

Firmware

  • Bring up up-link in 32G or 16G optical environment (FEC (Forward Error Correction) only) when connected with remote device that is not setting the SN bit to zero and TC bit to 1 at the same time during the speed negotiation phase and delays transmitting NOS during LQT phase.

UEFI

  • Firmware Management Protocol now supports flashing older Multiboot versions.
  • Firmware Management Protocol SetImage no longer displays dots on the screen.
  • The following HII (Human Interface Infrastructure) fields now require a reboot after value change:
    FC (Fibre Channel) Tape, Fabric Assigned WWPN (World Wide Port Name), Fabric Assigned Boot LUN (Logical Unit), Legacy BIOS (Basic Input Output System) Selectable Boot.
  • Changed Legacy BIOS (Basic Input Output System) Selectable Boot HII (Human Interface Infrastructure) default to Enabled.

Added support for the following:

16Gb Standup & 16Gb Mezzanine

  • Power Loss calculation in D_port (Destination port) operation.

16Gb/32Gb Standup

  • Power Loss calculation in D_port (Destination port) operation.
  • Support maximum training timeout for 32Gbps data rate per FC-FS-4 (Fibre Channel Framing and Signaling) specification.

Updated the Firmware/BIOS/UEFI packages for 8 Gb, 16 Gb and 32 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.77.08
    • Firmware 8.07.00
    • UEFI 6.64
    • BIOS 3.56
  • 16 Gb HBA/Mezz
    • Package 6.01.59
    • Firmware 8.07.16
    • UEFI 6.63
    • BIOS 3.43
  • 16/32 Gb
    • Package 01.70.85
    • Firmware 8.07.18
    • UEFI 6.47
    • BIOS 3.54

Version:2018.02.01 (5 Feb 2018)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Fixed the following:

8Gb Standup & 8Gb Mezzanine

BIOS

  • CTRL-Q cosmetic unexpected behavior

UEFI

  • Simple Control Transmission (SCT) 2.5 Extended Small Computer System Interface (SCSI) Pass Thru Protocol test incompleteness. PassThru_Func test no longer goes incomplete.
  • Operating System (OS) boot incomplete behavior when Read Only Memory (ROM) Based Setup-Utility (RBSU) Power On Self -Test (POST) Discovery Mode was set to Force Fast Discovery
  • Human Interface Infrastructure (HII) save unexpected behavior on Superdome servers. In the World Wide Name (WWN) Database menu, changes to Drive0 and Drive1 are now saved to Non Volatile Random Access Memory (NVRAM)
  • Unexpected behavior which caused adapter to not appear on the Health Summary page.
  • Operating System (OS) boot incomplete behavior when Read Only Memory (ROM) Based Setup-Utility (RBSU) Power On Self -Test (POST) Discovery Mode was set to Auto
  • World Login unexpected behavior when Power On Self -Test (POST) Discovery Mode was set to Auto

16Gb Standup & 16Gb Mezzanine

UEFI

  • Simple Control Transmission (SCT) 2.5 Extended Small Computer System Interface (SCSI) Pass Thru Protocol test incompleteness. PassThru_Func test no longer goes incomplete

16Gb/32Gb Standup

UEFI

  • Human Interface Infrastructure (HII) save unexpected behavior. In the World Wide Name (WWN) Database menu, changes to Drive0 and Drive1 are now saved to Non Volatile Random Access Memory (NVRAM).
  • Corrected adapter name format in Read Only Memory (ROM) Based Setup-Utility (RBSU) menus.
  • Unexpected behavior that caused Non Volatile Random Access Memory (NVRAM) overwritten after Human Interface Infrastructure (HII) changes
  • Behavior that caused Human Interface Infrastructure (HII) fields to not revert back to original settings when ESC key was used to discard changes

Added support for the following:

8Gb Standup & 8Gb Mezzanine

  • Additional 'show Command Line Processor (CLP's)'.
  • Gen10 Driver Health error codes.

16Gb Standup & 16Gb Mezzanine

  • Gen10 Driver Health error codes
  • OEMHP_TargetBootPaths Command Line Processor (CLP) command.

16Gb/32Gb Standup

  • Gen10 Driver Health error codes.
  • OEMHP_TargetBootPaths Command Line Processor (CLP) command.
  • Semaphore checks before flash reads and writes

Updated the Firmware/BIOS/UEFI packages for 8 Gb, 16 Gb and 32 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.77.03
    • Firmware 8.05.00
    • UEFI 6.59
    • BIOS 3.56
  • 16 Gb HBA/Mezz
    • Package 6.01.50
    • Firmware 8.05.64
    • UEFI 6.58
    • BIOS 3.43
  • 16/32 Gb
    • Package 01.70.66
    • Firmware 8.05.65
    • UEFI 6.41
    • BIOS 3.54

Version:2017.09.01 (25 Sep 2017)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

8Gb Standup & 8Gb Mezzanine

BIOS

  • Incorrect processing of Command Line Processor (CLP) ‘set netport’
  • Improper display of Command Line Processor (CLP) Logical Unit Number (LUN)

UEFI

  • Changed Operation Mode Human Interface Infrastructure (HII) strings. The new strings match the FastUTIL strings.
  • Self-certification Test (SCT) 2.4B BlockIO2 Protocol bug.
  • No response during Self-certification Test (SCT) 2.4B BlockIO2 Protocol test.
  • Self-certification Test (SCT) 2.4B AdapterInfo Protocol bugs.

16Gb Standup & 16Gb Mezzanine

UEFI

  • Adapter not appearing in Health Summary page.
  • Invalid Health message when link was down or driver was disabled.
  • Adapter connection mode to change (OS install related) when the Human Interface Infrastructure (HII) Link Speed field changed.

32Gb Standup & 16Gb Mezzanine

UEFI

  • Adapter not appearing in Health Summary page.
  • Invalid Health message when link was down or driver was disabled.
  • Added code to start operational firmware early.

Updated the Firmware/BIOS/UEFI packages for 8 Gb, 16 Gb and 32 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.76.06
    • Firmware 8.05.00
    • UEFI 6.52
    • BIOS 3.56
  • 16 Gb HBA/Mezz
    • Package 6.01.41
    • Firmware 8.05.63
    • UEFI 6.54
    • BIOS 3.43
  • 16/32 Gb
    • Package 01.70.51
    • Firmware 8.05.61
    • UEFI 6.36
    • BIOS 3.54

Version:2017.06.01 (12 Jul 2017)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

8Gb Standup & 8Gb Mezzanine

BIOS

  • Maintenance updates

UEFI

  • Fixed unexpected behavior during Win2012 boot on 3PAR storage array

16Gb Standup & 16Gb Mezzanine

BIOS

  • Added code to allow direct connected LUN to be configured when FA_BLUN is enabled.

  • Fixed unexpected behavior in check_mem64 routine where pci address was not setup correctly.

  • Fixed bug that caused FlexAddress to stop

UEFI

  • Fixed HII Load Defaults issue onHP QMH2672 16Gb Fibre Channel Host Bus Adapter . HII Load defaults no longer adds items to the Adapter Settings menu

  • Fixed unexpected behavior during Win2012 boot on 3PAR storage array

16Gb Standup & 16Gb Mezzanine

BIOS

  • Added POST Discovery Mode functionality

UEFI

  • Added POST Discovery Mode functionality

  • Added Scan Fibre Devices HII field

32Gb Standup & 16Gb Mezzanine

BIOS

  • Added POST Discovery Mode functionality

UEFI

  • Added POST Discovery Mode functionality

Updated the Firmware/BIOS/UEFI packages for 8 Gb, 16 Gb and 32 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.76.05
    • Firmware 8.05.00
    • UEFI 6.52
    • BIOS 3.31
  • 16 Gb HBA/Mezz
    • Package 6.01.36
    • Firmware 8.05.60
    • UEFI 6.53
    • BIOS 3.43
  • 16/32 Gb
    • Package 01.70.47
    • Firmware 8.05.60
    • UEFI 6.34
    • BIOS 3.54

Version:2016.12.01 (12 Dec 2016)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Added support for the following devices:

  • HPE StoreFabric SN1600Q 32Gb Dual Port Fibre Channel Host Bus Adapter
  • HPE StoreFabric SN1600Q 32Gb Single Port Fibre Channel Host Bus Adapter

Updated the Firmware/BIOS/UEFI packages for 8 Gb, 16 Gb and 32 Gb products.

  • 8 Gb HBA
    • Package 3.75.07
    • Firmware 8.02.00
    • UEFI 6.45
    • BIOS 3.31
  • 16 Gb HBA
    • Package 6.01.14
    • Firmware 8.02.51
    • UEFI 6.39
    • BIOS 3.31
  • 16/32 Gb SN1100Q/SN1600Q
    • Package 01.70.27
    • Firmware 8.03.10
    • UEFI 6.24
    • BIOS 3.37

Version:2016.09.01 (26 Sep 2016)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.


Add support for SN1600Q.

Updated the Firmware/BIOS/UEFI packages for 32 Gb products.

  • 32 Gb HBA SN1600Q
    • Package 01.70.24
    • Firmware 8.03.10
    • UEFI 6.22
    • BIOS 3.37

Version:2016.10.01 (24 Oct 2016)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Add support for the following devices:

  • HPE StoreFabric 84Q 4P 8Gb Fibre Channel HBA
  • HPE StoreFabric SN1100Q 16Gb 2P FC HBA
  • HPE StoreFabric SN1100Q 16Gb 1P FC HBA
  • HPE Synergy 3830C 16G Fibre Channel Host Bus Adapter

Updated the Firmware/BIOS/UEFI packages for 8 Gb and 16 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.75.07
    • Firmware 8.02.00
    • UEFI 6.45
    • BIOS 3.31
  • 16 Gb HBA/Mezz
    • Package 6.01.14
    • Firmware 8.02.51
    • UEFI 6.39
    • BIOS 3.31
  • 16 Gb SN1100Q
    • Package 01.70.17
    • Firmware 8.03.05
    • UEFI 6.19
    • BIOS 3.37

Version:2016.04.01 (31 Mar 2016)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

Add support for the following devices:

  • HPE StoreFabric 84Q 4P 8Gb Fibre Channel HBA
  • HPE StoreFabric SN1100Q 16Gb 2P FC HBA
  • HPE StoreFabric SN1100Q 16Gb 1P FC HBA
  • HPE Synergy 3830C 16G Fibre Channel Host Bus Adapter

Updated the Firmware/BIOS/UEFI packages for 8 Gb and 16 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.75.05
    • Firmware 8.02.00
    • UEFI 6.43
    • BIOS 3.31
  • 16 Gb HBA/Mezz
    • Package 6.01.05
    • Firmware 8.02.00
    • UEFI 6.38
    • BIOS 3.31
  • 16 Gb SN1100Q
    • Package 01.70.15
    • Firmware 8.03.05
    • UEFI 6.19
    • BIOS 3.37

Version:2016.02.01 (1 Apr 2016)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

16 Gb firmware

Fixed reporting asynchronous events related to link transitions via the ATIO queue with the 'Enable Asynchronous Event to Immediate Notify IOCB' option.

Fixed firmware system error (8002h) that occurred during target mode cleanup.

Fixed firmware system error that occurred during target mode cleanup with the presence of outstanding REC exchanges associated with SCSI exchanges.

Fixed login collision that occurred in private loop topology.

Updated the Firmware/BIOS/UEFI packages for 8 Gb and 16 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.75.03 (Binary 375A3)
    • Firmware 8.02.00
    • UEFI 6.42
    • BIOS 3.31
  • 16 Gb HBA/Mezz
    • Package 6.01.00
    • Firmware 8.02.00
    • UEFI 6.37
    • BIOS 3.31

Version:2015.10.01 (1 Oct 2015)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

8Gb Standup & 8Gb Mezzanine

BIOS

  • Maintenance updates

UEFI

  • Fixed OCBB bug that caused DMA errors during Linux boot
  • HII WWN Database menu allows the user to pick from a list of targets and LUNs
  • Fixed Windows Server 2012 boot issue on target storage array
  • Fixed OCSD checksum error on certain HP blade servers. Added PCI bus and device information to the firmware OCSD structure

16Gb Standup & 16Gb Mezzanine

BIOS

  • Maintenance updates

UEFI

  • Fixed OCBB bug that caused DMA errors during Linux boot
  • HII WWN Database menu allows the user to pick from a list of targets and LUNs
  • Fixed Windows Server 2012 boot issue on target storage array
  • Fixed OCSD checksum error on certain HP blade servers. Added PCI bus and device information to the firmware OCSD structure
  • Fixed OCBB polling error on servers
  • Fixed memory leak issue when driver exits due to NVRAM error
  • Fixed driver mapping issues on CLP enabled servers

Updated the Firmware/BIOS/UEFI packages for 8 Gb and 16 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.73.05 (Binary 373A5)
    • Firmware 8.01.02
    • UEFI 6.42
    • BIOS 3.31
  • 16 Gb HBA/Mezz
    • Package 6.00.14
    • Firmware 8.01.42
    • UEFI 6.37
    • BIOS 3.31

Version:2015.06.01 (15 Jun 2015)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

  • For 8 Gb UEFI
    • Fixed a driver load error when the Adapter Disable NVRAM bit was set.

Updated the Firmware/BIOS/UEFI packages for 8 Gb and 16 Gb products.

  • 8 Gb HBA/Mezz
    • Package 3.72.03 (Binary 372A3)
    • Firmware 7.04.00
    • UEFI 6.36
    • BIOS 3.28
  • 16 Gb HBA/Mezz
    • Package 5.00.12
    • Firmware 8.00.40
    • UEFI 6.31
    • BIOS 3.28

Version:2015.02.02 (21 Apr 2015)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

  • Corrects an unexpected behavior when 8Gb FC HBAs load the UEFI driver.

Updated the Firmware/BIOS/UEFI package for 8 Gb products.

  • 4 Gb HBA/Mezz
    • Package 2.03AF
    • Firmware 5.03.15
    • BIOS 3.13
  • 8 Gb HBA/Mezz
    • Package 3.72.03 (Binary 372A3)
    • Firmware 7.04.00
    • UEFI 6.36
    • BIOS 3.28
  • 16 Gb HBA/Mezz
    • Package 4.00.19
    • Firmware 7.04.00
    • UEFI 6.31
    • BIOS 3.28

Version:2015.02.01 (30 Mar 2015)

Upgrade Requirement:
Recommended - HPE recommends users update to this version at their earliest convenience.

8 Gb Products
BIOS

  • Changed VLAN ID max value from 4095 to 4094
  • Changed CTRL-Q to allow max value for Login Retry
UEFI
  • Fixed a bug that caused the HBA BIOS to ignore VC assigned WWPNs
  • Fixed drive mapping issues on CLP enabled servers


16 Gb Products
BIOS

  • Fixed LUN enabled but fabric assigned BOOT LUN not found
  • Changed CTRL-Q to allow max value for Login Retry
UEFI
  • Fixed memory leak issue when driver exits due to NVRAM error

Updated the Firmware/BIOS/UEFI packages for 8 Gb and 16 Gb products.

  • 4 Gb HBA/Mezz
    • Package 2.03AF
    • Firmware 5.03.15
    • BIOS 3.13
  • 8 Gb HBA/Mezz
    • Package 3.71.09 (Binary 371A9)
    • Firmware 7.04.00
    • UEFI 6.35
    • BIOS 3.28
      • BIOS Enhancements:
      • Added support for fabric assigned BOOT LUN
      • Added support for show port clp
      • Added code to not configure any targets when fabric assign Boot
      • Added code to allow fabric assigned Boot LUN when fabric assign WWPN enabled
      • Added options in CTRL-Q utility to enable fabric assign WWPN and fabric assign BOOT LUN
  • 16 Gb HBA/Mezz
    • Package 4.00.19
    • Firmware 7.04.00
    • UEFI 6.31
    • BIOS 3.28
      • BIOS Enhancements:
      • Added support for fabric assigned BOOT LUN
      • Added support for show port clp
      • Added code to not configure any targets when fabric assign Boot
      • Added code to allow fabric assigned Boot LUN when fabric assign WWPN enabled
      • Added options in CTRL-Q utility to enable fabric assign WWPN and fabric assign BOOT LUN

Version:2014.09.01 (9 Sep 2014)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

8 Gb Products
BIOS

  • Fixed bug in displaying selectable boot lun
  • Fixed issue with not restoring defaults on port 1
  • Fixed bug that could cause buffer overrun in CTRL-Q with Report Lun command
  • Added additional time to login target when called after EFI driver unloads.
  • Added code to handle boot LUN Greater than 255.
  • Added code to display message when 64 bit address is detected.
uEFI
  • Fixed a bug that caused the HBA BIOS to ignore VC assigned WWPNs.
  • Fixed drive mapping issues on CLP enabled servers.


16 Gb Products
BIOS

  • Added additional time to login target when called after EFI driver unloads.
  • Added code to handle boot LUN Greater than 255.
  • Added code to display message when 64 bit address is detected.
uEFI
  • Fixed a bug that caused the HBA BIOS to ignore VC assigned WWPNs.
  • Fixed drive mapping issues on CLP enabled servers.

Updated the firmware/BIOS/EFI packages for 8 Gb and 16 Gb products.

  • 4 Gb HBA/Mezz
    • Package 2.03AF
    • Firmware 5.03.15
    • BIOS 3.13
  • 8 Gb HBA/Mezz
    • Package 3.71.01 (Binary 371A1)
    • Firmware 7.03.00
    • BIOS 3.24
    • UEFI 6.32
  • 16 Gb HBA/Mezz
    • Package 4.00.12
    • Firmware 7.03.01
    • BIOS 3.24
    • UEFI 6.29

Version:2014.04.01 (21 Apr 2014)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

  • Updated the firmware/BIOS packages for 8 Gb and 16 Gb products.

  • 4 Gb HBA/Mezz
    • Package 2.03AF
    • Firmware 5.03.15
    • BIOS 3.13
  • QMH2572 Mezz Card
    • Package 2.59AF
    • Firmware 5.06.04
    • BIOS 3.13
  • 8 Gb HBA/Mezz
    • Enabled legacy BIOS boot
    • Enabled secure boot

    • Package 3.60A4
    • Firmware 5.09.00
    • BIOS 3.13
    • UEFI 6.28
  • 16 Gb HBA/Mezz
    • Enabled legacy BIOS boot
    • Enabled secure boot

    • Package 3.90.02
    • Firmware 6.07.02
    • BIOS 3.21
    • UEFI 6.25

Version:2014.02.01 (18 Feb 2014)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

  • Added UEFI driver for 8 Gb and 16 Gb products (except QMH2572).
    This component contains:
  • 4 Gb HBA/Mezz
    • Package 2.03AF
    • Firmware 5.03.15
    • BIOS 3.13
  • 8 Gb HBA/Mezz
    • Package 3.60A2
    • Firmware 5.09.00
    • BIOS 3.13
    • UEFI 6.23
  • 16 Gb HBA/Mezz
    • Package 3.90.01
    • Firmware 6.07.02
    • BIOS 3.21
    • UEFI 6.20
  • QMH2572 8 Gb FC Mezz
    • Package 2.59AF
    • Firmware 5.06.04
    • BIOS 3.13

Version:2013.08.01 (10 Sep 2013)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

SN1000Q BIOS fixes:

  • Fixed issue in CTRL_Q utility that might cause some cosmetic display issues.
  • Fixed issue with CTRL-Q Loopback Utility.

Download driver canon mp237 windows xp sp2. SN1000Q FW fixes:

  • Intermittent link failures that occurred after a cable pull.
  • Firmware failed to detect port id change after Fabric login timeout.
  • Performance scaling issues on multiple 4G tape devices.
  • Resolved a low write performance (throughput) issue seen when running single
    threaded IOs to multiple slower targets.
  • If the disable VP command was received while an ELS PassThru exchange was active
    for VP being disabled this caused a firmware buffer pool corruption and the
    firmware stopped responding.
  • A possible command iocb timeout occurred if the driver provided an invalid response
    queue reference.
  • Added new firmware/BIOS packages for 8 Gb and 16 Gb products:

  • 8 Gb HBA/Mezz
    • Package 2.65A1
    • Firmware 5.09.00
    • BIOS 3.13
    • UEFI 6.15
  • SN1000Q/QMH2672
    • Package 2.02.47
    • Firmware 6.07.02
    • BIOS 3.21
      • Now checks for invalid LUN in CTRL-Q scan devices.
      • Check for 4G flag in NVRAM for FC.
    • UEFI 6.13
  • QMH2572 8 Gb FC Mezz
    • Package 2.59AF
    • Firmware 5.06.04
    • BIOS 3.13
  • 4 Gb HBA/Mezz
    • Package 2.03AF
    • Firmware 5.03.15
    • BIOS 3.13

Version:2013.02.01 (19 Feb 2013)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

SN1000Q BIOS changes from 3.14 to 3.18:

  • Added code to check/program Feature Config checksum.
  • Fix bug that could cause buffer overrun in CTRL-Q with Report Lun command
  • Changed code to use 32 bit pointer to allocate/deallocate EBDA memory.
  • Added code to check/program Feature Config checksum.
  • Fixed Lun select & display issues with CTRL-Q
  • Added new firmware/BIOS packages

  • SN1000Q, 2.01.10
    • Firmware 6.02.00
    • BIOS 3.18

Version:2012.10.01 (26 Oct 2012)

Upgrade Requirement:
Optional - Users should update to this version if their system is affected by one of the documented fixes or if there is a desire to utilize any of the enhanced functionality provided by this version.

  • Added new firmware/BIOS packages

  • 4 Gb HBA/Mezz cards, 2.03AF
    • Firmware 5.03.15
    • BIOS 3.13
  • 8 Gb HBA/Mezz cards, 2.58AF
    • Firmware 5.03.15
    • BIOS 3.13
  • QMH2572 8 Gb FC Mezz, 2.59AF
    • Firmware 5.06.04
    • BIOS 3.13

Legal Disclaimer: Products sold prior to the November 1, 2015 separation of Hewlett-Packard Company into Hewlett Packard Enterprise Company and HP Inc. may have older product names and model numbers that differ from current models.

Qlogic Qmh2572 8gb Fc Hba Driver Download

This component contains version 9.1.14.22 of the QLogic Storport driver which provides FC-HBA. Download the Smart Component. QLogic QMH2562 8Gb Fibre Channel. Apr 21, 2016  The HBA's, drivers etc. Are as follows. QLogic Corp ISP2532-based 8Gb Fibre Channel to PCI Express HBA. Download Now Name. IfQCCGUIversionfailstoconnectanddisplaysanerrormessagelike“FC Get. Working properly because Windows cannot load the drivers. HP Downloads. For QLogic's Fibre Channel HBAs being used with the following HP. For HP latest approved drivers. 8Gb PCIe Dual Port Fibre Channel HBA.

Qlogic 3

Which you can download from drivers etc hosts. In SANsurfer FC HBA. Comes with the QLogic driver does not have. Download VMware vSphere. 8Gb and 16Gb Fibre Channel HBAs and 10000 Series FabricCache. VMware ESXi 6.0 FC-FCoE Driver for QLogic and OEM-branded Fibre Channel. 451871-B21 (QMH2562) 8Gb/s FC Mezzanine HBA for BladeSystem c. Refer to for additional information on other supported driver.