• Ibook G4 Trackpad
• Download Trackpad Driver
• Ibook G4 Trackpad Problem
• Ibook Free Download

Introduction

Download the latest Apple iBook G4 (Snow) iBook G4 A1055 device drivers (Official and Certified). Apple iBook G4 (Snow) iBook G4 A1055 drivers updated daily. Download Now. Apple iBook G4 Track Pad. I know that in some versions of the iBook G4, the trackpad does not work. DriverPack Solution driver update software Download. Secrets of Mac trackpad, from iBook to MacBook Air. But PowerBook G4 and iBook models released in 2005. An alternate trackpad driver.

Upgrade or replace the CD, DVD, combo or SuperDrive.

View and Download Apple M9388LL/A - iBook G4 - PowerPC 933 MHz service manual online. Service Guide. M9388LL/A - iBook G4 - PowerPC 933 MHz Laptop pdf manual download. Ibook g4 touchpad driver download: User’s review: The mouse created for the apple lisa was among the first commercial mice sold in the marketplace. Included with the lisa system in 1983, it was based on the mouse. Visit the apple site to learn, buy, and get support the apple keyboard is a keyboard designed by apple inc. Explore the world of mac. Download the latest Apple iBook G4 (Snow) device drivers (Official and Certified). Apple iBook G4 (Snow) drivers updated daily. Download Now. Ibook g4 free download - Apple iBook G4 Graphics Update, Apple iBook Firmware, Apple iBook Audio Update, and many more programs.

• Coin
• Phillips #00 Screwdriver
• Flathead 3/32' or 2.5 mm Screwdriver
• Spudger
• T8 Torx Screwdriver

• 12.7 mm PATA Optical Bay PATA Hard Drive Enclosure
• iBook G4 12' 1.2 1.33 GHz Optical Drive Cable
• iBook G4 12' 800 1 GHz Optical Drive Cable Bracket
• iBook G4 12' 1.2 1.33 GHz Optical Drive Cable Bracket
• iBook G4 12' 24x Combo Drive
• iBook G4 12' 24x Combo Drive (CW-8124)
• iBook G4 12' 4x SuperDrive
• iBook G4 12' CD Drive

• Use a coin to rotate the battery locking screw 90 degrees clockwise.

• Lift the battery out of the computer.

• Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

• If the keyboard does not come free, use a small flathead screwdriver to turn the keyboard locking screw 180 degrees in either direction and try again.

• Flip the keyboard over, away from the screen, and rest it face-down on the trackpad area.

• If the computer has an AirPort card installed, follow the next three steps to remove it.

• Push the wire clasp away from the AirPort card and toward the display, then rotate up to free it from the RAM shield.

• Grasp the clear plastic tab on the AirPort card and pull toward the display.

• Hold the AirPort card in one hand and use your other hand to remove the antenna cable.

• Remove the four silver Phillips screws that secure the RAM shield.

• Grasp the metal bracket on top of the RAM shield and pull upward to remove the shield.

• Pull the keyboard cable up from the logic board, holding the cable as close to the connector as possible.

• Make sure that you reconnect the keyboard cable before replacing the RAM shield.

• Use a pin (or anything you like) to remove the three rubber feet from the lower case.

• Remove the three newly-revealed Phillips screws.

• Use a spudger or small flathead screwdriver to pry up the three metal rings that housed the rubber bumpers.

• Remove the three Torx screws using a T8 Torx screwdriver.

• The shorter screw is in the center of the computer.

• Remove the two Phillips screws on either side of the battery contacts.

• Breathe deeply. Trying times are ahead, but we promise the lower case does come off.

• Push the thin rims of the lower case surrounding the battery compartment in, bending them past the tabs, and then lift up to free that corner of the lower case.

• There is a slot on the wall of the battery compartment that locks the lower case in place. Use a small flathead screwdriver to pry out the slot's lower rim and pull up on the lower case to free the slot from the tabs holding it.

• Run a spudger along the seam between the lower case and upper case on the front of the computer to free the tabs locking the lower case. Pull up on the lower case and continue to use the spudger as necessary until you hear three distinct clicks.

• Continue to run the spudger around the front, right corner. There are two tabs on the port side of the computer, one near the front corner and one near the sound-out port.

• There are three tabs over the optical drive that must be released before the lower case can come off. Slide the spudger into the lower case above the optical drive and run it toward the back of the computer until you hear three distinct clicks.

• Once the front and sides of the lower case are free, turn the computer so that the back is facing you and pull the lower case up and away from you until the back tabs pop free.

• it may be helpful to jiggle the case up and down.

• Remove the small greasy springs with white plastic caps from either side of the battery contacts.

• Remove the 4 Phillips screws from the bottom shield.

• The two longer screws are along the computer's edge, near the ports.

• Lift the bottom shield off.

• Remove the two Phillips screws securing the DC-In board.

• Disconnect the DC-In cable from the logic board.

• Deroute the cable from around the optical drive, removing tape as necessary, and angle the DC-In board out of its compartment.

• Remove the two Phillips screws from the battery compartment.

• We recommend placing the computer on a slab of grey anti-static packing foam from this point on to prevent damaging the logic board.

• Turn over the computer and open it.

• Pry up the magnet covering a Phillips screw near the middle of the computer.

• Remove the following 7 screws from the edges of the keyboard area.

• Three 2 mm Phillips along the right edge.

• One 4.5 mm Phillips underneath where the magnet was.

• One 6 mm Phillips with a small head in the lower left corner.

• Two 6 mm Phillips with large heads, one in the upper left corner and one in the middle

• Before you can yank the upper case off, you must disconnect the trackpad connector, the blue and white power cable, and speaker cable as described in the next steps.

• Lift the upper case from the right side and use a spudger or your finger to disconnect the trackpad connector hidden beneath the white plastic tab. Due to model variatons your trackpad connector may be different from the one pictured.

• Carefully lift the upper case about half of an inch and move it so that you can access the power and speaker cables.

• If the upper case is sticking, it may be necessary to free the tabs holding the upper case to the metal framework along the outer edge of the battery compartment.

• The connectors at the ends of the cables are attached very firmly to the sockets on the logic board. Pulling directly on the cable will either separate the cable from its connector or the socket from the logic board.

• Lift the upper case enough to disconnect the blue and white power cable from the logic board. Using your fingernails or a dental pick, carefully pry the connector from its socket. Make sure you're pulling only on the connector and not on the socket.

• Lift the upper case off completely and disconnect the multicolored speaker cable from the logic board. As before, make sure you're pulling only on the connector and not on the socket.

• Tip: the multi-coloured cable may be easier and less daunting to disconnect after removing the top heat shield. Prop the top case upright while removing the shield - the connector is then much more accessible.

• Remove the following 15 screws:

• Fourteen 3 mm Phillips.

• One 5.5 mm Phillips in the upper left corner.

• Mind the magnet position in the lower right corner

• Lift the top shield up from the right side, minding the upper left corner, which may catch on the metal framework.

• Remove the following 4 screws:

• One 3 mm Phillips in the channel between the optical drive and fan.

• Two 6 mm Phillips from either end of the drive bezel.

• One 6 mm Phillips with a collar from the bracket extending from the lower left corner of the drive.

• There are two different styles of optical drive ribbon. If the cable extending from the optical drive is white, skip this step. If the cable is orange, then complete this step and skip the next two steps.

• Disconnect the orange optical drive ribbon from the logic board.

• This is a diagram of the ribbon clamp connector you will disconnect in the next step.

• 1) With your fingernails, grasp the locking bar on either side and pull up a small amount (about 1/16' or 2 mm).

• 2) After disengaging the locking bar, slide the cable out of the connector.

• Release the optical drive ribbon clamp as described above. Slide the optical drive ribbon out of its connector.

• Lift the optical drive from the metal framework.

• Remove the two Phillips screws securing the metal bracket and cable to the back of the optical drive.

• Peel the orange cable up from the top of the optical drive, removing tape as necessary, and disconnect it.

• Remove the single Phillips screw securing the bezel at the front of the optical drive.

• This screw is longer than the two that secure the bracket and cable at the back of the drive.

• The bezel has several small, fragile tabs that will break easily.

• Use a spudger to carefully depress the two tabs on top of the bezel.

• Hold the optical drive on its side and depress the remaining tab to free the bezel from the drive.

• Turn the drive over and remove the two Phillips screws from the bracket on the side of the drive.

• These screws are only partially threaded.

• If you have a CD or any other object jammed in your optical drive, we have an optical drive repair guide. Sound blaster live driver download windows xp.

To reassemble your device, follow these instructions in reverse order.

To reassemble your device, follow these instructions in reverse order.

26 other people completed this guide.

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Ibook G4 Trackpad

Preview

Introduction

Upgrade or replace the CD, DVD, combo or SuperDrive.

• Coin
• Phillips #00 Screwdriver
• Flathead 3/32' or 2.5 mm Screwdriver
• Spudger
• T8 Torx Screwdriver

• iBook G4 12' CD Drive
• 12.7 mm PATA Optical Bay PATA Hard Drive Enclosure
• iBook G4 12' 24x Combo Drive
• iBook G4 12' 24x Combo Drive (CW-8124)
• iBook G4 12' 4x SuperDrive

• Lay your iBook upside down on a flat surface.

• Use a coin to rotate the battery locking screw 90 degrees clockwise.

• Lift the battery out of the computer.

• Pull the keyboard release tabs toward you and lift up on the keyboard until it pops free.

• If the keyboard does not come free, use a small flathead screwdriver to turn the keyboard locking screw 180 degrees in either direction and try again.

• Flip the keyboard over, away from the screen, and rest it face-down on the trackpad area.

• Remove the four silver Phillips screws that secure the RAM shield.

• Pull the keyboard cable up from the logic board, holding the cable as close to the connector as possible.

• Make sure that you reconnect the keyboard cable before replacing the RAM shield.

• Use a spudger or small flathead screwdriver to remove the three rubber feet from the lower case.

• Remove the three newly-revealed Phillips screws.

• Use a spudger or small flathead screwdriver to pry up the three metal rings that housed the rubber bumpers.

• Remove the three hex screws using a T8 Torx screwdriver.

• The shorter screw is in the center of the computer.

• Remove the two 4.5 mm Phillips screws on either sides of the battery contacts.

• Breathe deeply. Trying times are ahead, but we promise the lower case does come off.

• Push the thin rims of the lower case surrounding the battery compartment in, bending them past the tabs, and then lift up to free that corner of the lower case.

• There is a slot on the wall of the battery compartment that locks the lower case in place. Use a small flathead screwdriver to pry out the slot's lower rim and pull up on the lower case to free the slot from the tabs holding it.

• Run a spudger along the seam between the lower case and upper case on the front of the computer to free the tabs locking the lower case. Pull up on the lower case and continue to use the spudger as necessary until you hear three distinct clicks.

• Continue to run the spudger around the front right corner. There are two tabs on the port side of the computer, one near the front corner and one near the sound-out port.

• There are three tabs over the optical drive that must be released before the lower case can come off. Slide the spudger into the lower case above the optical drive and run it toward the back of the computer until you hear three distinct clicks.

• The front and sides of the lower case are now free.

• Turn the computer so that the back is facing you and pull the lower case up and toward you until the back tabs pop free.

• It may be helpful to jiggle the case up and down.

• Remove the small greasy springs with white plastic caps from either side of the battery contacts.

• Have patience and follow the directions, the end result is up to you. In my case it worked. But I was a Technician TRW Automotive. and worked on Air Bag modules that was returned from customer's that needed them analyzed. I just retired after 26 years.

• Remove the following 4 screws from the bottom shield:

• Two 3 mm Phillips.

• Two 7.5 mm Phillips.

• Lift the bottom shield off.

• Remove the two Phillips screws securing the DC-In board, removing tape as necessary.

• Deroute the cable from around the optical drive, removing tape as necessary.

• Disconnect the DC-In cable from the logic board and angle the DC-In board out of its compartment.

• Remove the two 3 mm Phillips screws inside the left edge of the battery tray.

• Three 3 mm Phillips around the battery compartment.

• Three 4.5 mm Phillips along the optical drive bezel. (a magnetic screwdriver may help to lift these screws out)

• One 12 mm Phillips in the lower right corner.

• Four 14.5 mm Phillips.

• We recommend placing the computer on a soft cloth from this point on to prevent damaging the logic board.

• Turn over the computer and open it.

• Use the flat side of a flathead screwdriver to remove the small magnet covering a screw near the middle of the computer.

• The shorter screw goes in the lower left corner.

• Remove the following 7 screws from the edges of the keyboard area.

• Three 2 mm Phillips along the right edge.

• One 4.5 mm Phillips underneath where the magnet was.

• One 6 mm Phillips with a small head in the lower left corner.

• Two 6 mm Phillips with large heads, one in the upper left corner and one in the middle.

• Before you can yank the upper case off, you must disconnect the trackpad connector, the blue and white power cable, and speaker cable as described in the next steps. Be especially careful with these cables; never pull directly on the cables, but use a spudger to pry up the connector directly.

• Carefully lift the upper case slightly and move it toward the front of the computer to reveal the trackpad connector. Use a spudger or your finger to disconnect the trackpad connector hidden beneath the white plastic tab.

• After disconnecting the track pad connector, carefully rotate the upper case away from you and rest it against the display.

• The connectors at the ends of the following cables are attached very firmly to the sockets on the logic board. Pulling directly on the cable will either separate the cable from its connector or the socket from the logic board.

• Use the sharp end of a spudger to disconnect the speaker cable connector.

• Using the sharp end of a spudger, disconnect the connector for the blue and white power cables. Again, be careful to pry up only on the connector.

• It is very easy to break the connector from the board, so be careful.

• The key is to apply force in two directions, down to keep the surface board connections intact, up to release the connector.

• The upper case is now free and can be removed from the computer.

• Remove the fifteen 3 mm Phillips screws securing the top shield to the computer.

• Remove the following 16 screws:

• Thirteen 3 mm Phillips.

• One 3 mm Phillips. (actual screw not present in image)

• Two 4 mm Phillips.

• Be sure to fit the screw near the left hinge through the loop in the display data cable, securing the cable to the upper case.

• Lift the top shield up from the right side, minding the upper left corner, which may catch on the metal framework.

• Remove the following 4 screws:

• One 3 mm Phillips in the channel between the optical drive and fan.

• Two 6 mm Phillips from the upper and bottom end of the drive bezel.

• One 6 mm Phillips with a collar from bracket extending from the lower left corner of the drive.

• Use a spudger to pry up the Reed Switch Board from the optical drive, removing tape as necessary.

• This is a diagram of the ribbon clamp connector you will disconnect in the next step.

• 1) With your fingernails, grasp the locking bar on either side and pull up a small amount (about 1/16' or 2 mm).

• 2) After disengaging the locking bar, slide the cable out of the connector.

• Release the optical drive ribbon clamp as described above. Slide the optical drive ribbon out of its connector.

• /eset-nod32-antivirus-7-free-download-crack.html. Lift the optical drive from the metal framework.

• Remove the two Phillips screws securing the metal bracket and cable to the back of the optical drive.

• Use a spudger to pry the white optical drive cable connector up from the top of the optical drive, removing tape as necessary.

• Remove the single Phillips screw securing the bezel at the front of the optical drive.

• This screw is longer than the two that secure the bracket and cable at the back of the drive.

• The bezel has several small, fragile tabs that will break easily.

• Use a spudger to carefully depress the two tabs on top of the bezel.

• Hold the optical drive on its side and depress the remaining tab to free the bezel from the drive.

• Turn the drive over and remove the two Phillips screws from the bracket on the side of the drive.

• These screws are only partially threaded.

• If you have a CD or any other object jammed in your optical drive, we have an optical drive repair guide.

Download Trackpad Driver

To reassemble your device, follow these instructions in reverse order.

To reassemble your device, follow these instructions in reverse order.

22 other people completed this guide.

Embed this guide

Ibook G4 Trackpad Problem

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Ibook Free Download

Preview