Fru Pn 49p1599 Drivers Download
Posted : admin On 25.12.2020Flashes (Alerts)
Ibm fru pn 49p1599 motherboard drivers. CNET Editors' review by: Ben Markton on August 22, 2013 GIF Photo Share is designed to help you create and manage GIFs on your iPhone listen to it on your iPhone without having to be and it works well for Match. IBM rev 1.2 FRU PN49P1599 OWNER'S MANUAL for identifing the pin of connectors Power on/off and speker from the - Computers & Internet question.
Abstract
The documents titled Supported Hardware List and Recommended Software Levels provide the operating systems, host adapters, SAN fabric elements, RAID controllers and selected other hardware that have been tested or qualified by IBM.
For operating systems, we show the latest tested release levels and service packs. Only the listed operating systems are supported. For host adapters, SAN fabric elements and RAID controllers, we list our currently recommended firmware and/or BIOS levels and formally support only the hardware listed.
Dbase odbc driver download. While these levels are not mandatory levels for a customer to be supported by IBM, they are the recommended levels. There may be known operational issues with older firmware and BIOS levels and, in these cases, a customer working with the IBM Support Centre may be directed to upgrade a component to a recommended level.
Content
IMPORTANT NOTICE: SAN Volume Controller V2.1.0 is no longer supported. Refer to the SAN Volume Controller Support Statement for further information.
| HBAs - by Host Operating System: |
Windows 2000 and 2003 Server Windows 2003 + MPIO (Storport Driver) Red Hat EL 2.1 U6 Red Hat EL 3.0 U4 SLES 8 SP3 IBM AIX on pSeries IBM AIX on iSeries HP-UX for PA-RISC Sun Solaris 8 and Solaris 9 Novell Netware VMware |
| IBM BladeCenter® HS20 / HS40 / JS20 iSCSI Host Attachment RAID Controllers
DS6000 DS8000 IBM ESS HP Hitachi Data Systems EMC Sun StorEdge StorageTek SAN Switches
Cisco MDS CNT McDATA
Inter Cluster SAN Routers Microsoft Cluster Certified Configurations IBM TotalStorage NAS Gateway 500 |
HBAs - by Host Operating System
Windows NT 4 ServerHBA Driver | Platform |
QLA2310/F QLA2310/FL | |
FC-2 133 P/N 24P0960 | |
QLA2342 QLA2342L |
Windows 2000 and Windows 2003 Server (32 bit only)
HBA Driver | Platform | ||
IBMTotalStorage DS4000 (FAStT) | |||
N/A | 8.1.5.64 | Intel Based Servers Including x360, x345, x335, x440 | Windows 2000 System Requirements Windows 2003 System Requirements |
QLA2310/F QLA2310/FL | |||
QLA2340 QLA2340L | |||
FC2-133 Dual Port P/N 24P8053 | |||
LP9002L LP9002DC | |||
LP9802 LP9802DC |
Windows 2003 Server + MPIO (Requires Storport Driver + SDDDSM)
Host Bus Adapter | HBA Firmware | Notes | |
QLA2310/F QLA2310/FL | Intel Based Servers Including x360, x345, x335, x440 Storport Driver not supported by BladeCenter Server at this time | Windows 2003 only with the following fixes: KB883646 KB824354 Requires SDD Driver SDDDSM package 2.0.0.0-B14 for W2K3 | |
QLA2340 QLA2340L | |||
FC2-133 Dual Port P/N 24P8053 | |||
Red Hat EL Advanced Server 2.1 U6
Red Hat EL Advanced Server 3.0 U4
Host Bus Adapter | HBA Firmware | Notes | |
QLA2310/F QLA2310/FL | BIOS 1.43 | Fabric maintenance and CCL restrictions apply, please visit Software Restrictions for further details | |
QLA2340 QLA2340L | |||
QLA2342 QLA2342L | |||
SLES 8 United Linux 1.0 SP3
HBA Driver | Platform |
IBMTotalStorage DS4000 (FAStT) | |
FC-2 133 P/N 24P0960 | |
QLA2342 QLA2342L | |
FC6228 | Tested with SLES 8 SP3 kernel 2.4.21-111 only Fabric maintenance and CCL restrictions apply, please visit Software Restrictions for further details |
IBM AIX on pSeries
IBM AIX 4.3.3
HBA Driver | Platform | |
| devices.pci.df1000f7.rte.4.3.3.76 devices.pci.df1000f7.com 4.3.3.92 devices.fcp.disk.rte 4.3.3.78 | ||
| devices.pci.df1000f9.rte.4.3.3.76 devices.pci.df1000f7.com 4.3.3.92 devices.fcp.disk.rte 4.3.3.78 | 3.91A1 |
IBM AIX 5.1
HBA Driver | Platform | |
| devices.pci. df1000f7.rte 5.1.0.37 devices.pci.df1000f7.com 5.1.0.64 devices.fcp.disk.rte 5.1.0.60 | ||
| devices.pci.df1000f9.rte 5.1.0.37 devices.pci.df1000f7.com 5.1.0.64 devices.fcp.disk.rte 5.1.0.60 | 3.91A1 | |
| devices.pci.df1080f9.rte 5.1.0.2 devices.pci.df1000f7.com 5.1.0.64 devices.fcp.disk.rte 5.1.0.60 |
IBM AIX 5.2
HBA Driver | Platform | |
FC5716 | devices.pci.df1000fa.rte 5.2.0.50 devices.pci.df1000f7.com 5.2.0.60 devices.fcp.disk.rte 5.2.0.60 devices.scsi.disk.rte 5.2.0.60 | IBM pSeries |
| devices.pci.df1000f7.rte 5.2.0.30 devices.pci.df1000f7.com 5.2.0.60 devices.fcp.disk.rte 5.2.0.60 devices.scsi.disk.rte 5.2.0.60 | ||
| devices.pci.df1000f9.rte 5.2.0.30 devices.pci.df1000f7.com 5.2.0.60 devices.fcp.disk.rte 5.2.0.60 devices.scsi.disk.rte 5.2.0.60 | ||
| devices.pci.df1080f9.rte 5.2.0.30 devices.pci.df1000f7.com 5.2.0.60 devices.fcp.disk.rte 5.2.0.60 devices.scsi.disk.rte 5.2.0.60 |
IBM AIX 5.3
HBA Driver | Platform | |
| devices.pci.df1000fa.rte 5.3.0.10 devices.pci.df1000f7.com 5.3.0.22 devices.fcp.disk.rte 5.3.0.21 devices.scsi.disk.rte 5.3.0.21 | IBM pSeries | |
| devices.pci.df1000f7.rte 5.3.0.1 devices.pci.df1000f7.com 5.3.0.22 devices.fcp.disk.rte 5.3.0.21 devices.scsi.disk.rte 5.3.0.21 | ||
| devices.pci.df1000f9.rte 5.3.0.1 devices.pci.df1000f7.com 5.3.0.22 devices.fcp.disk.rte 5.3.0.21 devices.scsi.disk.rte 5.3.0.21 | ||
| devices.pci.df1080f9.rte 5.3.0.1 devices.pci.df1000f7.com 5.3.0.22 devices.fcp.disk.rte 5.3.0.21 devices.scsi.disk.rte 5.3.0.21 |
IBM AIX on iSeries
IBM AIX 5L Version 5.2 on iSeries AIX LPAR
HBA Driver | Platform | |
| devices.pci.df1000fa.rte 5.2.0.50 devices.pci.df1000f7.com 5.2.0.52 devices.fcp.disk.rte 5.2.0.50 devices.scsi.disk.rte 5.2.0.50 | IBM iSeries | |
| devices.pci.df1000f9.rte 5.2.0.30 devices.pci.df1000f7.com 5.2.0.52 devices.fcp.disk.rte 5.2.0.50 devices.scsi.disk.rte 5.2.0.50 | ||
| devices.pci.df1080f9.rte 5.2.0.30 devices.pci.df1000f7.com 5.2.0.52 devices.fcp.disk.rte 5.2.0.50 devices.scsi.disk.rte 5.2.0.50 |
IBM AIX 5L Version 5.3 on iSeries AIX LPAR
HBA Driver | Platform | |
FC0646 | devices.pci.df1000fa.rte 5.3.0.1 devices.pci.df1000f7.com 5.3.0.2 devices.fcp.disk.rte 5.3.0.2 devices.scsi.disk.rte 5.3.0.2 | |
| devices.pci.df1000f9.rte 5.3.0.0 devices.pci.df1000f7.com 5.3.0.2 devices.fcp.disk.rte 5.3.0.2 devices.scsi.disk.rte 5.3.0.2 | ||
| devices.pci.df1080f9.rte 5.3.0.0 devices.pci.df1000f7.com 5.3.0.2 devices.fcp.disk.rte 5.3.0.2 devices.scsi.disk.rte 5.3.0.2 |
HP-UX 11i v1 for PA-RISC (64-bit only)
HBA Driver | |
A6795A | HP 9000 Series Servers (PA-RISC 64-bit only) |
SunOS 5.8/Solaris 8 (64 bit only)
SunOS 5.9/Solaris 9 (64 bit only)
Host Bus Adapter | FCode | |
Sun Sparc | ||
JNI AMCC FCX / FCX2-6562 | ||
QLA2340 QLA2340L | FCode in Driver Package |
Novell Netware 6.5 SP2
Host Bus Adapter | HBA Firmware | |
QLA2342 QLA2342L |
VMware
ESX | Platform | |
QLA2340 QLA2340L | Guest OS - Windows 2000 and 2003 only | |
QLA2342 QLA2342L | ||
Guest OS - Novell Netware only Only supported in single path mode, please visit Software Restrictions for further details. |
BladeCenter HS20 / HS40 / JS20
HS20 (8678, 8832, 8843) / HS40 (8839) Drivers
Blade Operating System | HBA BIOS |
Windows 2000 (32 bit only) | Driver and Firmware downloads are available from the Qlogic site under IBM BladeCenter (Do not select 7.01.01-fo option for Linux; failover enablement is not required with SDD) |
Red Hat EL Advanced Server 2.1 | |
Red Hat EL Advanced Server 3.0 |
JS20 (8842) Drivers
Blade Operating System | FCode | |
AIX 5.2 ML04 | devices.pci.77101223.com 5.2.0.51 devices.pci.77101223.rte 5.2.0.50 devices.fcp.disk.rte 5.2.0.50 devices.scsi.disk.rte 5.2.0.50 | |
Red Hat EL Advanced Server 3.0 (U4) | Driver and Firmware downloads are available from the Qlogic site under IBM BladeCenter (Do not select 7.01.01-fo option for Linux; failover enablement is not required with SDD) |
BladeCenter Blades HS20 (8678, 8832, 8843), HS40 (8839) and JS20 (8842) are supported in the following configurations:
Internal Switch Module | Supported Fabrics | Notes | ||||
The BladeCenter Optical Pass Through Module is essentially a connection between Fibre Channel HBAs in the BladeCenter and the external SAN. As the BladeCenter HBAs are functionally equivalent to a QLogic 231x type adapter, this optical pass through mode of attachment may be used with all SVC SAN configurations that support QLogic HBA attachment to the SVC | Some configurations will require the use of interop mode. Information on configuring BladeCenter can be found in the BladeCenter documentation | |||||
The BladeCenter HBAs are attached to external devices via either the QLogic or Brocade switch within the BladeCenter. When operating in this configuration the BladeCenter internal switch may only be attached to switches produced by a single vendor | ||||||
Brocade SAN Switch (2-port) | Brocade | |||||
iSCSI Host Attachment
SVC is supported connected to Cisco MDS 9000 Family platform with the following attached iSCSI hosts (in single path mode only):
Drivers | |
Windows 2000 (32 bit only) (SP4) | Microsoft initiator driver rev 1.05a and Microsoft initiator driver rev 1.06 |
Windows 2003 (32 bit only) (SP1) | |
Red Hat EL Advanced Server 2.1 | |
Red Hat EL Advanced Server 3.0 |
Guidelines for zoning iSCSI hosts and SVC
In a conventional Fibre Channel SAN, there will normally be a number of SAN paths between a particular SVC IO group and the server HBA ports that use the vdisks supplied by that IO group. A multipathing device driver is run on the server to resolve these multiple paths into a single logical device that the server can perform I/O to. The multipathing device driver also provides failover and path recovery functions that deal with scenarios where the SAN fabric paths change or fail. The present iSCSI solution however only supports a single path between the iSCSI host NIC and the SVC vdisk and there is no multipathing driver in the iSCSI host. This means that there is no recovery from errors and is not possible to concurrently upgrade the SVC firmware while maintaining connectivity from an iSCSI host system. As such it is inappropriate for the SVC to present the vdisk at multiple ports in the Fibre Channel SAN, and to prevent this, the user must select a single SVC port in each SVC IO group that is to be associated with each iSCSI host. Zoning is then applied in the MDS switch so that each iSCSI host can see only one SVC port in each SVC IO group. If multiple iSCSI hosts are in use, the hosts should be evenly spread across the ports in each SVC IO group. The SVC svctask mkvdiskhostmap command should then used to ensure that each SVC vdisk is mapped to a single NIC in the server.
Please visit the following Cisco link for further information: http://www.cisco.com/en/US/netsol/ns512/netqa0900aecd802a9217.html
RAID Controllers
Please refer to the Configuration Guide which details the recommended customer configurable settings that should be applied for each storage controller type.
IBM DS4000
Firmware Release | Notes | |
(FAStT100) | Download the recommended version of the Storage Manager from the DS4000 website | Dynamic expansion of controller LUNs is not supported Please refer the DS4000 website for the latest recommended DS4000 client software and RDAC levels |
05.30.21.00 | ||
04.01.02.33 | ||
05.34.07.00 | ||
06.12.10.00 | ||
06.12.10.00 | ||
06.12.10.00 | ||
05.41.58.02 | ||
06.15.11.00 |
DS4000 (FAStT) Expansion Units
Enclosure Firmware | Notes | |
9554 | Concurrent download of code with I/O is not supported SVC places no limitations on the existing DS4000 code and firmware upgrade processes Please refer to DS4000 documentation on the DS4000 website for specific procedures and limitations | |
9166 | ||
EXP700 | FC | |
9629 | ||
EXP810 | FC | |
IBM DS6000
Firmware |
Minimum DS6800 Licensed Machine Code level: 5.0.0 For further support, including interoperability details, see: http://www-1.ibm.com/servers/storage/support/disk/ds6800/planning.html |
IBM DS8000
Firmware |
Minimum DS8100 Licensed Machine Code level: 5.0.0 For further support, including interoperability details, see: http://www-1.ibm.com/servers/storage/support/disk/ds8100/planning.html |
Minimum DS8300 Licensed Machine Code level: 5.0.0 For further support, including interoperability details, see: http://www-1.ibm.com/servers/storage/support/disk/ds8300/planning.html |
IBM ESS
Firmware | |
2105-E10 | Dynamic expansion of controller LUNs is not supported |
2105-F10 | |
2105-800 | |
2105-750 |
HP
Firmware | Notes | |
v8.7.F-7 Plus all no-charge upgrades from the vendor | Your HP support representative will perform hardware maintenance and firmware upgrade procedures. These operations are non-disruptive to SVC Dynamic expansion of controller LUNs is not supported Refer to Configuration Guide which details specific requirements for attachment to SVC | |
EMA 16000 | ||
3.025 | Your HP support representative will perform hardware maintenance and firmware upgrade procedures. These operations are non-disruptive to SVC Dynamic expansion of controller LUNs is not supported Refer to EVA product documentation for concurrent maintenance procedures | |
XP48 | HDS 9910 | Your HP support representative will perform hardware maintenance and firmware upgrade procedures. These operations are currently not supported by SVC Dynamic expansion of controller LUNs is not supported Refer to Configuration Guide which details specific requirements for attachment to SVC |
01-18-71-00/00 | ||
XP128 | HDS 9970V | |
21-11-02-00/00 |
Hitachi Data Systems
Firmware | Notes | |
055L | Your HDS support representative will perform hardware maintenance and firmware upgrade procedures. These operations are non-disruptive to SVC Dynamic expansion of controller LUNs is not supported Refer to Configuration Guide which details specific requirements for attachment to SVC | |
0656/A | ||
953xV / 9570V | ||
1659AZ* | ||
1656/A | ||
9585V | ||
1659AZ* | ||
AKA | ||
01-19-67-00/00 | Your HDS support representative will perform hardware maintenance and firmware upgrade procedures. These operations are currently not supported by SVC Dynamic expansion of controller LUNs is not supported Refer to Configuration Guide which details specific requirements for attachment to SVC | |
01-19-67-00/00 | ||
9970V | HP XP128 StorEdge 9970 | |
21-13-3-0/0 |
EMC
Firmware | ||
CX 200 | 02.16.200.5.012 | Your EMC support representative will perform hardware maintenance and firmware upgrade procedures. These operations are non-disruptive to SVC Dynamic expansion of controller LUNs is not supported Refer to Configuration Guide which details specific requirements for attachment to SVC |
| 02.16.400.5.012 | ||
CX 600 | 02.16.600.5.012 | |
| 02.16.300.5.012 | ||
CX 500 | 02.16.500.5.012 | |
| 02.16.700.5.012 | ||
FC4700 | 08.51.60 | Your EMC support representative will perform hardware maintenance and firmware upgrade procedures. Concurrent hardware maintenance operations are non-disruptive to SVC. This product requires I/O to be quiesced during firmware upgrade Dynamic expansion of controller LUNs is not supported Refer to Configuration Guide which details specific requirements for attachment to SVC |
8000 Series (8130, 8230, 8430, 8530, 8730, 8830) | Your EMC support representative will perform hardware maintenance and firmware upgrade procedures. Concurrent hardware maintenance operations are currently not supported by SVC. Concurrent firmware upgrade is non-disruptive to SVC Dynamic expansion of controller LUNs is not supported Refer to Configuration Guide which details specific requirements for attachment to SVC | |
Enginuity 5670 |
Sun StorEdge
AKA | ||
StorEdge 9910 | HDS 9910 | Your Sun support representative will perform hardware maintenance and firmware upgrade procedures. These operations are currently not supported by SVC Dynamic expansion of controller LUNs is not supported Refer to Configuration Guide which details specific requirements for attachment to SVC |
01-19-67-00/00 | ||
StorEdge 9970 | HDS 9970V | |
21-13-3-0/0 |
StorageTek
StorageTek D-Series
Model | NVSRAM | Notes |
5.30.23.00 | 8.30.G2.05 | |
5.39.01.00 5.40.19.00 6.10.15.00 6.12.10.00 | N4884-530855-005 N4884-540855-005 N4884-610855-006 N4884-612855-003 | |
D220 | N2882-534855-003 | |
D240 | N2882-540855-007 N288X-610855-006 N288X-612855-003 | AKA FlexLine 240 |
5.30.23.00 5.40.19.00 6.10.15.00 6.12.10.00 | N5884-530855-005 N5884-540855-005 N588X-610855-006 N588X-612855-003 | AKA FlexLine 280 |
StorageTek FlexLine 200 Series
Firmware | SANTricity | |
FLX210 | N282X-612855-003 | |
FLX240 | N288X-612855-003 | AKA D240 |
6.12.10.00 | 9.12.G2.01 |
SAN Switches
Brocade
IBM Model | Class | Notes | |
5.0.1b | |||
2005-B32 | Fabric Switch | ||
5.0.1b | EMC DS-32B2 | ||
5.0.1b | |||
Fabric Switch | |||
3.1.2a | (fw) 3.0.2q when used with BladeCenter | ||
2.6.2b |
Cisco MDS
Model | Class | Notes |
2.1(2b) | 2062-D04 | FCIP is supported. Maximum one way latency supported is 10ms Support for up to 256 host attachment with level 2.1(1a) and above with SVC code level 2.1.0.4. Please refer to the Software Restrictions for further details |
2062-D07 | ||
Fabric Switch |
iSCSI is supported on the Cisco MDS 9000 family. Please refer to the iSCSI Host Attachment section for more information
CNTFC/9000 Model | Class | Notes |
3.0.5 | Asynchronous replication capabilities for SAN Volume Controller are available from CNT. For more information, please refer to this website: www.cnt.com/products/extension/ura | |
5.0.0 | ||
McDATA
IBM Name for IBM Badged Switch | Firmware | AKA | |||
IBM# for IBM Badged Switch | Other | ||||
EOSc 08.00.01 | 2031-016 | ||||
Sphereon Fabric Switch | |||||
ES-3216 | 2031-216 | ||||
2027-232 | |||||
IBM SAN24M-1 | Sphereon Fabric Switch | 2031-224 | |||
Intrepid Director | EMC ED-64M | ||||
2027-140 | EMC ED-140M | ||||
Intrepid Director | |||||
Other Hardware:
Technologies for extending the distance between two SVC clusters can be broadly divided into the following two categories. These extenders are only supported as inter cluster links and not intra cluster links, i.e. they should not be used between SVC nodes that are part of the same cluster.
Inter Cluster Fibre Channel Extenders
Fibre channel extenders simply extend a fibre channel link by transmitting fibre channel packets across long links without changing the contents of those packets. IBM has tested a number of such fibre channel extender technologies with SVC up to a maximum one way latency of 34ms and will support any fibre channel extender technology provided that it is planned, installed and tested meeting the requirements as detailed on the Software Restrictions document.
Inter Cluster SAN Routers
SAN routers extend the scope of a SAN by providing 'virtual nPorts' on two or more SANs. https://generaltyrantyouth.tumblr.com/post/632585338205929473/fleetwood-mac-boston-2004-download. The router arranges that traffic at one virtual nPort is propagated to the other virtual nPort but the two fibre channel fabrics are independent of one another. Thus nPorts on each of the fabrics cannot directly log into each other.
Due to the more complex interactions involved, IBM explicitly tests products of this class for interoperability with SAN Volume Controller.
Distance limitations are defined below as latency measured in milliseconds (ms). Please visit the Software Restrictions document for more information.
Inter Cluster SAN Routers | AKA | ||
IBM# for IBM Badged Switch | |||
McDATA Eclipse 1620 SAN Router | 2027-R04 | ||
SAN16M-R SAN Router | 4.6.2 | ||
Cisco MDS 9000 Series Inter VSAN Routing | Successful test results have been obtained with packet latencies of up to 10ms | ||
Microsoft Cluster Certified Configurations
Configurations | ||
Emulex LP9002 | DL380G2 DL380G3 DL380G4 ML570 DL740 | Please visit the V2.1.0 Recommended Software Levels for host operating system information |
Emulex LP10000 | DL380G4 |
IBM TotalStorage NAS Gateway 500
NAS System Software | Model |
NAS v1.1.1 | 001 |
[{'Product':{'code':'STPVGU','label':'SAN Volume Controller'},'Business Unit':{'code':'BU010','label':'Systems - Storage'},'Component':'V2.1.0','Platform':[{'code':'PF025','label':'Platform Independent'}],'Version':'2.1.0','Edition':'}]
Document Information
Fru Pn 49p1599
Modified date:
17 June 2018